Air conditioning Hampton homes need starts with the lot. The ABS 2021 Census counts 62.0% of the suburb's occupied dwellings as separate houses, 22.7% as semi-detached, row or townhouses (Victoria 13.9%) and 14.2% as flats, and Bayside City Council's 2024 Hampton Urban Forest Precinct Plan describes original houses, subdivided lots and apartments around Hampton station. Peak Air Conditioning Brighton quotes split, multi-head and ducted systems and reverse cycle heat pumps, cleans split systems, services gas ducted heaters and evaporative coolers, and finds faults across this City of Bayside suburb, from the Hampton Street shops to the streets near Hampton Beach. This page covers each job by house and lot type, the salt air, timber walls and heritage controls that shape an install, and indicative Melbourne prices. Calls are taken from 6am to 10pm every day.
GET A FREE QUOTE
Two things shape how a heating or cooling job in Brighton starts: knowing what each option costs before anything is booked, and finding a visit time that suits the household. Peak Air Conditioning Brighton is set up around both. Prices are put in writing after the site visit, option by option, and the phone line takes bookings for new systems, servicing, aircon cleaning and repairs from 6am to 10pm, seven days a week.

OUR STORY
What is happening to the lot decides the cooling layout in Hampton. Bayside's 2024 precinct plan says most of the suburb's residential land is in the Neighbourhood Residential Zone, which has a maximum building height of two storeys, and that much of the development there takes the form of dual occupancy, the redevelopment of detached houses or small multi-dwelling projects. Around the station the plan records multi-storey apartment development increasing steadily. The three parts below follow those three kinds of lot. Heating and kilowatt sizing are left to the timber floor and concrete slab section of this page, so this section deals only with layout and cooling.
A house still standing on its original block usually keeps the roof space it was built with, and that is what ducted cooling needs. The ABS 2021 Census counts 62.0% of Hampton's dwellings as separate houses and 35.8% with four or more bedrooms, against 32.6% for Victoria, and the precinct plan notes particularly large front setbacks in the north of the suburb. Bayside's 2006 Hampton Street Centre structure plan says the existing residential areas would keep their spacious and leafy character. On a block like that, one indoor unit in the ceiling and one outdoor unit at the side or rear can serve every room through ceiling outlets, so no wall in the house carries an indoor head.
Mitsubishi Electric's ducted page says installing ducted air conditioning in an existing home needs access to the ceiling cavity, and that a qualified installer assesses the roof space to work out how the ductwork is routed. Its PEA-M installation manual asks for service access space in the ceiling for the fan, drain pump and coil. The same Mitsubishi page describes zoning as a way to cool the living areas during the day and switch to the bedrooms at night, and says the right zone layout depends on the floor plan, the way the house is lived in and the system's capacity. So the roof inspection checks three things before a ducted layout is drawn: whether the ceiling joists leave a clear path for the ducts, where the access hatch is, and whether the outdoor unit can sit away from the front garden the setback protects.
Where an original block has been split, two or more dwellings now share land that once held one house. The ABS counts 22.7% of Hampton's dwellings as semi-detached, row or terrace houses or townhouses, well above Victoria's 13.9%, and Bayside's plan forecasts the suburb's dwellings to grow by an average of 89.5 a year to 7,440 by 2041, partly through the subdivision of existing lots into units. These dwellings are often narrow, sometimes double-storey, and built without a generous roof space, which points to a wall split system in each living area and each bedroom rather than one central system.
For split system installation in a unit, each indoor head goes on a solid internal or external wall. Mitsubishi Electric's MSZ-AP installation manual recommends mounting it 1.8 m to 2.3 m from the floor, on a rigid wall, where cool air spreads over the room and the filter can be removed easily. Its pipe limits set how far apart the indoor and outdoor units can be: a maximum pipe length of 20 m and a maximum height difference of 12 m. That matters on a double-storey unit, where a bedroom head upstairs is piped down to an outdoor unit on the ground. Each dwelling on the lot is given its own system, its own outdoor unit and its own controls, so one household's settings never depend on the other's. The outdoor units usually line up along a narrow side or rear setback; the conditions part of this page covers how salt air and the wall material change where they sit. Where the dwellings share common property, the owners corporation rules decide where each unit may go, and that is settled before the positions are drawn.
Bayside's precinct plan says multi-storey development in the Hampton Street Major Activity Centre has been increasing steadily, predominantly around Hampton Street station, and that parts of the Willis Street Precinct are in the Residential Growth Zone, which allows apartment buildings. The Victorian Government's Train and Tram Zone Activity Centres page for Hampton (last updated 19 November 2026) goes further: it describes maximum building heights of eight storeys for most of Hampton Street and up to 12 storeys in some locations, with a three-storey street wall. That is a plan for the activity centre, so check the current planning controls before relying on it. The ABS counted 14.2% of Hampton's dwellings as flats or apartments in 2021.
An apartment's options depend on where the outdoor unit can sit. A wall split with its outdoor unit on the balcony is the usual choice, and the MSZ-AP manual's 12 m height limit means an outdoor unit on the roof is out of range for any apartment more than 12 m below it. Where the apartment has a bulkhead, a slim ducted unit can hide in it: Mitsubishi Electric says its PEAD series stands 250 mm high across a 5.0 kW to 14.0 kW range, made for low ceilings and tight bulkhead cavities where a conventional ducted unit will not fit. Mitsubishi also notes that a bulkhead system is designed to condition a single room, while a ducted system serves several, so the bulkhead's length and the rooms it reaches decide whether it suits. Any outdoor unit on a balcony or an outside wall changes the building's appearance, which in most blocks needs the owners corporation's written approval before the install date is set.
SERVICES WE OFFER IN Hampton
Three things around a Hampton house decide where the equipment goes and how it is fixed: the salt air off Port Phillip Bay, the timber walls of the older houses, and the Heritage Overlay. Bayside's precinct plan says that, of the vegetation, landscape and heritage overlays, the Heritage Overlay is the only one that applies to private land in Hampton. The three parts below take each in turn, and each ends with the check that settles it.
Hampton Beach and the foreshore sit on the bay side of the suburb, and the outdoor coil is the part of an air conditioner that salt attacks. The Quote Yard says outdoor units in the bayside suburbs around Port Phillip corrode at the coil and cabinet, which eventually causes refrigerant loss, and that it shows as gradually declining performance rather than sudden failure. It calls this a recognised pattern rather than bad luck, and says households often live with a degraded system for a season before investigating. Its suburb list puts Hampton in its Bayside group, though the corrosion passage does not name the suburb, and no source read for this page gives a distance from the water at which the risk starts or stops, so the precaution applies across the suburb rather than to a measured zone.
Placement is the first defence. Mitsubishi Electric's MSZ-AP installation manual asks for an outdoor position where the unit is not exposed to strong wind and where rain or direct sunlight can be avoided as much as possible, and energy.gov.au suggests asking an ARCtick technician about shelter from the afternoon sun for the outside unit. Near the bay that usually means the lee side of the house, behind a wall or the building itself, with the manual's clearances kept clear: from 100 mm on its tightest sides to 350 mm on its widest, with open space above. Rinsing is the second. The Quote Yard says rinsing the coil with fresh water periodically slows the corrosion considerably, so a gentle fresh-water rinse of the outdoor fins, with the unit switched off first, is the owner's part between services. Some makers treat the coil: Mitsubishi describes its Blue Fin anti-corrosion coating as inhibiting corrosion of the aluminium fins, which salt in the air causes, especially in coastal areas. The Quote Yard adds that at replacement time, coastal or marine specification units with treated coils are worth the modest premium. Whether a quoted model has a treated coil is stated on the quote, model by model.
Weatherboard is common in Hampton's older streets. Bayside's precinct plan says the central part of the suburb is distinctive for its concentration of Californian bungalows, typically single-storey weatherboard houses set in established gardens, and the council's statement for the Orlando Street precinct describes modest timber Edwardian cottages. On a timber house, the cladding is only a skin over the frame, so what the indoor plate and the outdoor bracket are fixed to matters. Mitsubishi Electric's MSZ-AP manual says to find a structural material such as a stud in the wall and fix the installation plate to it horizontally, and to mount the outdoor unit where a rigid wall or support prevents extra operating sound or vibration. Fixed through to the studs, the indoor plate and the outdoor bracket put their load into the frame rather than the boards, which is what the manual's structural-material and rigid-support lines ask for.
The pipe hole is the other weak point. The same manual has a 65 mm hole drilled so that the outdoor side sits 5 mm to 7 mm lower than the indoor side, a sleeve inserted, and the gap sealed with putty after the pipes are through. The fall keeps rainwater running out of the wall rather than into it, and the seal stops damp and draughts reaching the frame, which on a timber house is where rot would start. The drain hose runs below the refrigerant pipes and points downwards, so condensate leaves the house rather than pooling against the boards. In a Heritage Overlay, Bayside's local heritage policy lists retaining original fabric among its strategies, so a new pipe hole goes in a side or rear wall rather than in a front weatherboard, which the heritage check below covers.
Bayside City Council's heritage page says owners can see whether a property is in a Heritage Overlay by searching the Schedule to the Heritage Overlay in the Bayside Planning Scheme, which also shows the form, landscaping and paint controls that apply. Read through the State planning schemes portal on 20 November 2026, that schedule has 38 rows naming Hampton, none of them on the Victorian Heritage Register. Three are precincts, the Castlefield Precinct, the Orlando Street Precinct and the Hampton Street Precinct, and the rest are individual houses, churches and trees. Precincts are mapped by area, so whether a particular address is inside one is a VicPlan check, not a guess from the street name.
For a house in the overlay, Clause 43.01-1 of the scheme needs a permit for domestic services normal to a dwelling if they are visible from a street (other than a lane) or a public park, and Clause 73.01 includes an air conditioner, cooling or heating system in those services. Bayside's local heritage policy, Clause 15.03-1L, read the same day, is direct about it: it asks for all ancillary services, naming air conditioning plants among them, to be sited so they are concealed from the street. Two details from the same clauses matter on install day. Painting an unpainted surface in the overlay needs a permit, so a pipe cover on face brick is left in a finish that needs no paint, and the schedule marks 14 Hampton rows as having external paint controls. Where a permit is needed, the application is a VicSmart class and exempt from public notice under Clause 43.01-4. Bayside's heritage web page adds no rule beyond the scheme and asks owners to contact the council first, so check with Bayside City Council before the unit position is fixed.


Why choose us in Hampton
Hampton's buyers are mostly owners. The ABS counts 40.9% of homes owned outright, against 32.2% for Victoria, and 34.3% owned with a mortgage, and 35.8% of homes have four or more bedrooms. Bayside's precinct plan forecasts the share of residents over 60 to rise from 25.1% in 2021 to 39.7% by 2041, and expects ageing residents to downsize to a smaller home while staying in the area. So a system is bought either by a family planning to stay or by an owner preparing to sell. Peak Air Conditioning Brighton works across the City of Bayside, Hampton included. Refrigerant work is done under an ARC licence, checkable on the ARC's online licence portal, wiring by a licensed electrician, checkable on Energy Safe Victoria's public registers, and gas work by a gasfitter registered with the Building and Plumbing Commission. Bookings run from 6am to 10pm, seven days a week.
The written quote follows an inspection because three things in a house can change the job, and none can be judged from a phone call. The first is the switchboard. A new split or a ducted system often needs a dedicated circuit, and The Quote Yard's servicing guide says dedicated circuits, isolator replacement, switchboard capacity and any wiring alterations belong to a licensed electrician; whether the board has space and capacity for another circuit is seen by opening it. The second is the roof space, for any ducted job: Mitsubishi Electric says the installer assesses it to decide how the ductwork is routed, so the visit checks the access hatch, the clear height and any old ducts that could be reused, depending on their condition.
The third is the outdoor unit spot. The MSZ-AP manual asks for a position with good airflow and little dust, out of rain and direct sun as far as possible, where neighbours are not bothered by operating sound or hot or cool air, and on a firm base. Near the bay that is also the sheltered side described in the salt air part of this page, and in a Heritage Overlay a spot concealed from the street. With those three checked, the written quote names the model and its kW, each indoor and outdoor position, the pipe route, any switchboard work and any approval the job depends on, such as an owners corporation consent or a heritage check. A family planning to stay can then compare the options line by line, and nothing on the quote rests on a guess about what is in the roof or behind the meter box.
An owner preparing to sell wants the system to count in the sale, and the paperwork is what a buyer can check. The first piece is the warranty: manufacturer warranty applies when a system is installed to the manufacturer's requirements, and the Victorian Energy Upgrades program requires products it discounts to carry at least a five-year warranty for a home. Keeping the warranty card with the installation date shows a buyer how much cover is left. The second is the electrical certificate. Energy Safe Victoria says a Certificate of Electrical Safety is required under the Electricity Safety Act 1998 and that the electrician must give the customer a copy, within 30 days for non-prescribed work such as an air conditioner circuit.
Where gas work is done, the third is the gas compliance certificate. The Building and Plumbing Commission says one must be issued for the installation, relocation or replacement of a Type A gas appliance, such as a ducted heater, whatever the cost, and given to the customer within five days. The fourth is the service record. Seeley's cooler manuals include a service record table for the date, technician and company, Brivis's two-yearly heater schedule records what was checked at each visit, and a split's service history can be kept the same way. A buyer, or the agent preparing the sale, can then see when each system was installed, who certified it and when it was last serviced. A downsizer moving to a smaller home in the area takes the same habit along: the new system's papers start their own file on the day of handover.
SERVICES WE OFFER IN Hampton
Each part of Hampton was settled at a different time, and the council's heritage records show it. Wikipedia says the area began as market gardens in the 1840s and 1850s, that the railway was extended in 1887 with a station first called Retreat, after the Retreat Hotel, and that the station was later renamed Hampton, the name the beach and other landmarks already carried after a local market gardener, Dyas Hampton. War commission homes followed for returned soldiers of the First World War, and rapid development came in the 1930s when the market gardens were subdivided. The three parts below follow the shopping street, the war service estate and the streets toward the beach.
Wikipedia describes Hampton's shopping centre along Hampton Street as having more than 50 cafes and restaurants plus numerous fashion boutiques. Bayside's 2006 structure plan for the centre focused activity between Willis Street and the railway line, said housing above the shops would feature throughout, and described the modest scale of the street's two-storey shopfronts. Much of the strip is now the Hampton Street Precinct in the Heritage Overlay: Bayside's statement says the street developed as the suburb's pre-eminent shopping strip after the railway extension of 1887, with single and double-storey inter-war shops on both sides and most remaining largely intact to their first-floor facades. The council lists 46 contributory entries on Hampton Street, and the schedule applies tree controls to a Chinese elm at 310 and 312-314 Hampton Street.
That shapes where a shop's plant goes. Clause 43.01-1 needs a permit for heating and cooling systems on a building other than a dwelling in the overlay where they are visible from a street or public park, and Bayside's policy asks for air conditioning plant to be concealed from the street, so the intact first-floor facade stays clear and the outdoor units go on the roof behind the parapet or at the rear. The Building and Plumbing Commission classes cafes and shops as Class 6 and offices as Class 5, which matters for the compliance paperwork. For the tenancy itself, Mitsubishi Electric's light commercial range includes wall units, ceiling cassettes and under-ceiling units that it says suit premises with exposed ceilings or heritage features where traditional ducted systems are not viable. Commercial air conditioning covers maintenance and multi-unit sites; ask Bayside about any listed shopfront before the plant position is fixed.
The Sandringham and District Historical Society says that after the First World War, 67 acres of farmland were carved off the Castlefield Estate to create a neighbourhood of close to 300 Californian bungalow houses, one of the largest war service home developments in Victoria, in streets named after battlefields. Bayside City Council's heritage precincts page, read on 20 November 2026, shows that the estate is protected: the Castlefield Precinct (HO652) is described as one of the War Service Homes Commission's largest estates, developed over two years and made up almost entirely of single-storey bungalows, with a distinctive diagonal street pattern. The council lists contributory houses street by street, including 14 on Passchendaele Street, 16 on Lagnicourt Street (spelt Lagincourt in the council's list), 17 on Rouen Street and 25 on Villeroy Street, plus Hamel, Favril and Ludstone Streets. OpenStreetMap places the Hampton Rovers club on Ludstone Street, close to Castlefield Reserve.
For a bungalow in the precinct, the system choice and the heritage rule meet at the front of the house. A single-storey bungalow usually has a roof space for ducted cooling, or takes a split in the living room and main bedroom, but whichever is chosen, Clause 43.01-1 and Bayside's policy put the outdoor unit and the pipe run where they cannot be seen from the street: behind the house or on a side wall set well back. An address on the council's contributory list is in the precinct; one that is not listed may still sit inside the mapped area as a non-contributory property, so it is checked on VicPlan. The schedule row for HO652 sets no external paint or tree controls, so a pipe cover on an already painted weatherboard can be painted to match, while unpainted brick stays unpainted. The council asks owners to contact it first, and that call comes before the install date is booked.
OpenStreetMap places Orlando, Small and Grenville Streets in Hampton between the Hampton Street shops and Hampton Beach, the beach Wikipedia says was named after the market gardener Dyas Hampton. The Orlando Street Precinct (HO664) covers part of this ground. Bayside's statement says it holds the highest concentration of intact Edwardian villas in Hampton, mostly modest timber Edwardian cottages and inter-war bungalows, with remnant Edwardian shops that heralded the Hampton Street strip, and it lists 14 contributory houses on Orlando Street, numbers 40 to 76, and 11 on Railway Crescent. The heritage schedule names no Small Street or Grenville Street row, so a house there is checked on VicPlan rather than assumed to be in or out.
Two other sources describe what is changing here. The Victorian Government's Hampton activity centre page says secondary and tertiary active frontages have been applied to streets such as Small Street and Willis Street to encourage development that activates the way toward the coast, and Bayside's precinct plan records Federation and inter-war houses along and near the foreshore. So these streets hold timber cottages that need the bracket and pipe-hole care set out in the weatherboard part of this page, beside newer buildings that take splits or a bulkhead ducted unit. Being on the way to the beach, they are also where the salt air advice counts: the outdoor unit goes on the sheltered side of the house, the coil is rinsed with fresh water from time to time, and a treated coil is worth asking about when a unit is replaced. In the Orlando Street precinct, the same concealed-from-the-street rule applies as in the Castlefield estate.


Why choose us in Hampton
For heating in Hampton, the floor under the house matters as much as the rooms above it. Bayside's precinct plan describes Californian bungalows, Federation and inter-war houses and post-war homes, alongside newer two-storey development and apartments, so one street can hold an old house on a framed timber floor beside a rebuild on a concrete slab. YourHome, the Australian Government's guide to sustainable housing, treats the two very differently: timber holds little heat, while concrete absorbs and releases it slowly. Postcode 3188 spans more than one climate zone, and the Energy Rating calculator, checked on 20 November 2026, allocates it to the Cold zone. The two parts below take each floor in turn.
No source read for this page counts how many Hampton houses sit on stumps, so the inspection confirms the floor house by house. Where the house does sit on stumps, the floor is part of the heating question. YourHome's insulation guide says the thermal resistance of 19 mm of timber is approximately R0.25, so insulation is required, and for cool climates it advises insulating the underside of timber floors exposed to outside air while keeping enough subfloor ventilation. An uninsulated floor is a heat loss the heater has to make up, which is worth knowing before the system is chosen.
The subfloor is also a route for the heat. YourHome says ducted air heaters circulate hot air through roof or underfloor ducts, that they can run on gas or electricity, and that electric systems may also be used for cooling. It adds that floor outlets are often better than ceiling outlets for heating, because warm air naturally rises. Brivis's Classic installer's manual shows the floor version: its internal heaters can go beneath the floor with at least 200 mm between the appliance and the lowest part of the floor structure, close to the access opening or with 1.2 m of clearance to the ground along the way in, on a 50 mm concrete base, feeding typical 300 mm x 100 mm floor registers. So the choice comes down to two systems. An electric ducted reverse cycle system heats and cools through one set of ducts, though cooling ducts need to be larger, YourHome notes. A new gas ducted heater heats only. energy.vic.gov.au's page on existing homes (updated 9 October 2026) says there is no requirement to replace existing gas space heating, so a gas house can keep gas; check the current version, since government pages carried caretaker notices before the 28 November 2026 election.
Where a rebuild or an apartment sits on a concrete slab, which the inspection confirms, YourHome's thermal mass guide explains why that changes how heating is run. Concrete and brick absorb and release heat slowly, so a slab holds warmth once it has it. The same guide warns that thermal mass can reduce comfort in rooms heated only now and then, because it slows the response, and says buildings with little winter sun respond slowly to heating and are best kept at consistent temperatures using efficient systems. For a slab home, that points to a reverse cycle heat pump run steadily at a moderate setting rather than switched hard on and off. energy.gov.au puts each extra degree of heating at 5% to 10% more energy use, so the steady setting also keeps the bill in check.
The kW comes from a heat load check, not the floor area. Mitsubishi Electric's buying guide says sizing is not as simple as looking at the square metreage and lists the factors that count: the local climate, which sides face the sun, insulation, the size, type and orientation of windows and doors, and ceiling height. The answer is then matched to a real model. Mitsubishi's MSZ-AP range steps through rated heating outputs of 3.2, 3.7, 5.4, 6.0, 6.8, 8.0 and 9.0 kW, measured at 7 °C outdoors under AS/NZS 3823.1.1, and because 3188 sits in the Cold zone, the cold-zone heating stars on the Energy Rating label are the figure to read: the MSZ-AP25 shows 3 heating stars there against 6 for cooling. YourHome also suggests locating thermal mass near the centre of the building, particularly where an air conditioner is positioned there; read the other way round, in a slab home the head that serves the living area does most good in the central rooms. Reverse cycle air conditioning sized room by room this way is then named on the written quote, model and kW together.
SERVICES WE OFFER IN Hampton
Each kind of visit in Hampton protects something different: the inside of the cooling units, the safety of a gas heater, and the reliability of a heat pump that works hard through winter. energy.gov.au advises a service inspection before peak use, giving late spring and autumn as examples. The three parts below sort the visits by what they protect, and each names the trade licence the work falls under.
This part is about the unit, not health. Mr Duct, a Melbourne cleaner, explains that a split makes water every time it cools, and that the water sits on the coil, the barrel fan and in the drain tray, which are the parts that grow mould and cause the smell. Aircon cleaning deals with exactly those parts: the coil is washed, the barrel fan scrubbed and the drain tray flushed, with a wash bag catching the rinse water. The owner's share sits between visits. Mitsubishi Electric's filter guide says to clean the filter every two weeks during peak seasons, and its operating manual says the owner should never wash the inside of the indoor unit. A clean is not a service, though. A service adds electrical checks, a drain test and operating readings, and The Quote Yard's servicing guide describes it as a longer visit than a filter clean.
An evaporative cooler on the roof needs its own visit. energy.gov.au says these coolers draw outside air through a wet filter and push it into the house, and that they lose effectiveness on humid days. Seeley International's owner's manuals for Breezair and Coolair coolers set a residential service every two years before summer, covering the pads, pump, drain valve and float valve, and they note that new pads can give off an odour at first. The pads wear out in time: The Quote Yard says they typically need replacing every two to five seasons, depending on the water. Seeley's troubleshooting table puts inadequate cooling down to dry pads, too few exhaust openings or excessive humidity, so a pre-summer evaporative cooler service checks the water flow to the pads and replaces worn ones before the first hot day.
A gas ducted heater is serviced for safety as much as warmth. The Better Health Channel says all gas heaters, including central heating units, should be serviced at least every two years by a licensed gasfitter, tested for carbon monoxide spillage and have the flue inspected. Brivis's operation manual sets its Service Maintenance Schedule at the same two-year interval and has the technician record the CO level in parts per million, the burner pressures and the outlet and return air temperatures. Its StarPro service manual says soot marks on the flue terminal or flue pipe indicate poor combustion and possibly a blocked heat exchanger, so the flue is checked from the outside as well as at the heater. Only plumbers registered or licensed by the Building and Plumbing Commission in the Type A appliance servicing class may do this work.
The ducts are the other half of a ducted heating system. Duct cleaning is a separate job from the heater service: the ducts, the floor or ceiling registers and the return air vent are vacuumed where dust has built up, and the runs are checked for crushed flexible duct, split joints and missing insulation. The Quote Yard lists duct cleaning as a separate service, and Mr Duct prices it by the number of outlets, so a house with registers in every room costs more to clean than one with a few. Doing the heater service and the duct clean on one visit keeps both on the same record. For the 22.7% of Hampton homes the ABS records as rented, Consumer Affairs Victoria also requires a gas safety check every two years by a gasfitter endorsed for Type A servicing. Fault codes, ignition faults and part prices for the heater itself are covered under ducted heating service and repairs.
The Quote Yard, a Victorian cost guide, says Victorian reverse cycle systems run far more hours heating than cooling, and that this loads the reversing valve, the defrost controls and the compressor. It says reversing valve failures are correspondingly more common here. The fault is easy to recognise: the valve directs refrigerant one way for cooling and the other way for heating, and when it sticks the system will do one but not the other. For example, a unit that still cools in summer but will not heat in winter points to the valve first.
Fault finding starts before any part is ordered, because other faults can look the same. The Quote Yard says room and coil sensors produce confusing symptoms, such as a system failing to defrost properly, and Daikin's malfunction code chart gives one code, EA, whose supposed causes include the valve, a gas shortage, the circuit board and a thermistor. Other brands use their own codes. Capacitors are the most common failure of all, The Quote Yard says, with failures clustering around the eight to twelve year mark. Where the refrigerant is low, the leak is found and repaired before anything is added: the ARC and AIRAH Refrigerant Handling Code of Practice says a system known to be leaking must not be topped up, and that a repaired system is recharged to the quantity on its identification plate. A reversing valve replacement means recovering the refrigerant, brazing in a new valve and recharging, which is why it is priced on its own line in the price section of this page. On an outdoor unit near the bay, a slow loss of capacity can also be salt corrosion of the coil, which the salt air part of this page covers. Refrigerant work is done under an ARC refrigerant handling licence.


Why choose us in Hampton
The figures below are indicative ranges from Melbourne cost guides, installers and the Victorian Energy Upgrades program, read in November 2026. They are those sources' estimates, not this business's prices, and a written quote follows a visit. For a fault, The Quote Yard's Victorian repairs page gives a general attendance and diagnosis fee of $120 to $250, and its Melbourne table gives call-out fees from $120 to $280 across its five Melbourne regions. Its suburb list, read on 20 November 2026, puts Hampton under Bayside & Peninsula, which has no fee row of its own, so the call-out is confirmed at the quote.
The ABS counts 23.6% of Hampton's homes with two bedrooms and 35.8% with four or more, and the two ends of that range buy split systems differently. Whatsthedamage's Melbourne table (updated November 2026) prices a supplied and installed split by size: $1,250 to $2,625 for 2.5 kW, $1,475 to $2,950 for 3.5 kW, $1,900 to $3,675 for 5 kW, $2,300 to $4,725 for 7 kW and $3,150 to $5,800 for 9 kW. A two-bedroom unit pays that per room it conditions, usually the living area first and then the main bedroom, and Climate Control Solutions puts two separate 3.5 kW splits at about $4,600 to $5,800 installed against about $4,000 to $5,200 for a two-head multi-head, which suits a unit with room for only one outdoor condenser. The heat load check described in the heating section sets each unit's kW, not the bedroom count.
A four-bedroom house that wants every room done reaches multi-head territory. Whatsthedamage puts a two-head system at $4,200 to $7,900, typically $5,800, and a four-head system at $7,350 to $12,600, typically $8,900. Where an old unit is being changed over, its like-for-like changeover with removal runs $1,575 to $3,150, and removal and disposal alone $105 to $370. Climate Control Solutions says to allow roughly $450 extra where a new circuit is needed for the licensed electrical work. Where a split replaces a non-ducted gas room heater, the Victorian Energy Upgrades household table lists discounts of $630 to $1,610 for a 3 kW to 9 kW reverse cycle unit. Long pipe runs, a double-storey bracket and switchboard work are what move a job within these ranges.
Whatsthedamage's Melbourne table splits ducted reverse cycle quotes along the line a four-bedroom Hampton house sits on. A three-bedroom home, or a single-storey four-bedroom home with good roof access, falls in its standard band at $8,400 to $14,700, typically $11,550. A larger four-bedroom home, a two-storey house, or a system zoned room by room falls in its premium band at $12,600 to $23,100, typically $16,800. So the same four-bedroom house can land in either band, depending on whether it is a single-storey house on its original block with a clear roof space or a two-storey rebuild wanting each room on its own zone. QuickAir's Melbourne guide puts a typical three to four-bedroom outcome at $8,000 to $14,000. None of these guides gives a separate price per zone, so the zone count is priced on the quote.
Ducted heating sits in the same cluster. Whatsthedamage puts gas ducted heating supply and install at $4,000 to $11,550, typically $7,350, and whole-house ductwork replacement with new insulated flexible ducts at $2,000 to $6,300, which an old house's ducts may need before a new heater or ducted system is connected. Where a ducted gas heater is replaced with ducted reverse cycle, the Victorian Energy Upgrades household table lists discounts of up to $2,520 for 10 kW, $4,200 for 16 kW and $5,530 for 22.4 kW, and up to $490, $770 and $910 at the same sizes where an old ducted reverse cycle system is replaced with a new one. The program's page says a replaced system must be in a property more than two years old and the new product must carry at least a five-year warranty for a home.
For servicing, whatsthedamage's Melbourne table puts a split service or clean at $105 to $335 per unit, typically $210, and a ducted system service at $210 to $580, typically $345. The Quote Yard's Victorian figures give a split at $120 to $250, a multi-head at $180 to $400 and a ducted system at $250 to $500. A gas ducted heater service with no faults is $220 to $320 in homeupkeep's Melbourne table, or $280 to $380 with a CO test, and The Quote Yard puts duct cleaning, a separate service, at $250 to $600. An evaporative cooler serviced before summer comes to $170 to $330 in its Melbourne table, with the pads checked rather than replaced.
For repairs, The Quote Yard says most land between $300 and $900, with a leak repair and regas at $400 to $900 fitted, a reversing valve at $700 to $1,500 and a compressor at $1,400 to $2,800; whatsthedamage puts major repairs and regas at $315 to $1,250 per job. A corroded coil is the exception to repairing. The Quote Yard says salt attacks the fins and tubing of the outdoor coil around the bay, that a corroded coil develops pinhole leaks which cannot practically be repaired one by one, and that replacement coils are expensive enough that system replacement usually wins. None of the guides read gives a coil price, so the comparison is made on the quote. Its repair-or-replace rule then applies: where a repair costs more than roughly half the price of a new system and the unit is past about ten years old, replacement is usually the better decision.

Air Conditioning Installation
Air conditioning installation in Brighton VIC: split, multi-head or ducted systems sized by heat load, sited for bayside salt air and quoted in writing after an inspection.

Split System Installation
Split system installation in Brighton VIC: high-wall, floor-standing and multi-head splits installed to the manufacturer's manual and quoted in writing after an inspection.

Ducted Air Conditioning
Ducted air conditioning in Brighton VIC: reverse cycle, add-on cooling and new-build systems, zoned room by room and quoted in writing after a roof space inspection.

Reverse Cycle Air Conditioning
Reverse cycle air conditioning in Brighton VIC: heat pump heating and summer cooling from one system, fitted as splits, ducted or a hybrid unit, quoted in writing.

Evaporative Cooler Service and Repairs
Evaporative cooler service in Brighton VIC: pads, tray, bleed, pump and fan checked before summer, repairs for warm air and noisy fans, and a written record.

Air Conditioning Repair
Air conditioning repair in Brighton VIC: split, multi-head and ducted faults diagnosed, leaks found before any regas, salt-corroded coils checked, and a written quote first.

Emergency Air Conditioning Repair
Urgent air conditioning breakdowns in Brighton VIC, booked 6am to 10pm seven days: ceiling leaks, electrical faults and heatwave failures, with rates stated in the call.

Air Conditioning Service
Air conditioning service in Brighton VIC for split, multi-head and ducted systems: filters, coils, drains, outdoor units and electrical checks, with readings recorded.

Aircon Cleaning
Aircon cleaning in Brighton VIC: split system coils, barrel fans and drain trays cleaned inside the unit, with a wash bag fitted and every unit quoted in writing.

Ducted Heating
Ducted heating in Brighton VIC: new and replacement gas ducted heaters or electric ducted systems, with heater position, gas supply, flue and ducts checked before a written quote.

Ducted Heating Service and Repairs
Gas ducted heater servicing in Brighton VIC: two-yearly services to the maker's schedule, CO spillage testing, rental gas safety checks, duct cleaning and error code repairs.

Commercial Air Conditioning
Commercial air conditioning in Brighton VIC: splits, cassettes, rooftop packaged units and VRF for shops, offices and industrial units, with servicing and leak checks.
air conditioning In Hampton
Whatsthedamage's Melbourne table (updated November 2026) puts a supplied and installed split at $1,250 to $2,625 for 2.5 kW and $1,475 to $2,950 for 3.5 kW. Ducted reverse cycle runs from $8,400 to $14,700 in its standard band and $12,600 to $23,100 for larger, two-storey or room-by-room zoned homes. These are indicative ranges from a cost guide, and the final figure follows an inspection and a written quote.
No single brand is best for every home, and this page ranks none. Daikin, Mitsubishi Electric, Fujitsu and Panasonic are among the brands whose parts The Quote Yard says move through Melbourne wholesalers, so the useful comparison is model against model at the same kW. Read the cold-zone stars on the Energy Rating label, since Hampton's postcode is allocated to the Cold zone, then compare the warranty and how readily parts are available. A written quote that names the model lets you check those details before you decide.
The Quote Yard, a Victorian cost guide, puts it down to salt corrosion of the outdoor unit and calls it a recognised pattern. Airborne salt attacks the fins and tubing of the outdoor coil around Port Phillip, and in time the coil develops pinhole leaks that cannot practically be repaired one by one. It usually shows as slowly falling performance rather than a sudden breakdown. Rinsing the outdoor coil with fresh water periodically slows the process, and a sheltered position helps too.
It works, but less well on humid days. energy.gov.au says evaporative coolers work well in low-humidity regions and have reduced effectiveness on humid days, and Seeley's owner's manual says that in humid weather a cooler will not reduce the temperature as much as on drier days. A cooler still helps on hot, dry days, and energy.gov.au lists reverse cycle air conditioning as the other cooling choice for the humid ones. A cooler that is kept should be serviced every two years before summer, as Seeley's manuals advise, with its pads replaced every two to five seasons.
The Victorian Energy Upgrades program says households can save up to $1,140 a year on energy bills when a ducted (whole-of-home) gas heater is removed or replaced with an efficient reverse cycle air conditioner. energy.gov.au says reverse cycle systems are 300% to 600% efficient because they move heat rather than make it, and that ducted reverse cycle is more cost-efficient than gas heating. The actual saving depends on the house, the system and the tariff, so the quote compares the models on their heating stars.
Usually not, unless the property is in a Heritage Overlay. In Bayside's planning scheme, an air conditioner on a house in the overlay needs a permit if it is visible from a street, other than a lane, or a public park, and Bayside's heritage policy asks for air conditioning plant to be concealed from the street. Search the Schedule to the Heritage Overlay in the Bayside Planning Scheme or look the address up on VicPlan, then check with Bayside City Council. Apartments also need the owners corporation's approval.
GET A FREE QUOTE
BUSINESS
SERVICES
OPERATING HOURS
Sun: 6:00am - 10:00pm
Mon: 6:00am - 10:00pm
Tue: 6:00am - 10:00pm
Wed: 6:00am - 10:00pm
Thu: 6:00am - 10:00pm
Fri: 6:00am - 10:00pm
Sat: 6:00am - 10:00pm