GET A FREE QUOTE

Brighton sits 11 km south-east of Melbourne's Central Business District in the City of Bayside, and Wikipedia records that its streets still follow the crescent-shaped town layout surveyed in mid-1841. By the late 1840s stately homes stood on The Terrace, now the Esplanade, overlooking Dendy Street Beach, and the Victorian Heritage Register places Wikipedia lists for the suburb run from Billilla on Halifax Street to Kamesburgh on North Road and The Pines on Middle Crescent. Older houses bring a planning question into a heating or cooling job. Bayside's local heritage policy, Clause 15.03-1L, applies to properties in a Heritage Overlay and asks for air conditioning plants to be sited so they are concealed from the street, so the outdoor unit position is worked out with that rule in mind, and VicPlan shows whether a given address is covered.
The ABS 2021 Census fills in the rest of the housing picture. Separate houses make up 57.2% of Brighton's occupied homes, against 73.4% across Victoria, while townhouses and terraces (22.4%) and flats (19.8%) both sit well above the state shares. A third of homes (33.1%) have four or more bedrooms, and 45.1% are owned outright, against 32.2% statewide. In a house with four or more bedrooms, the quote weighs ducted air conditioning against a set of split systems, and the site visit settles which one suits the layout. Sea air is the third factor: The Quote Yard's air conditioning repairs guide names Brighton among the bayside suburbs, from Williamstown around to Frankston, where outdoor units corrode at the coil and cabinet, and says periodic fresh-water rinsing of the outdoor coil slows it, with corrosion faults covered on the air conditioning repair page.

A heating or cooling job can involve several trades, but the household deals with one booking line from the first call to the handover. That line takes the booking, passes on what is known about the home and the system, and stays the number to ring with a question before, during or after the work. The site visit, written quote and installation day are set out on the homepage; this part of the page covers what holds those steps together.
Before work starts, the job is explained in plain terms: what is being installed, serviced or repaired, which trades will attend, where units, pipes or ducts will run, and what will be tested at the end. Explaining the tests first matters because the finish line is a tested system, and the tests are set by industry rules rather than by habit. The Australian Refrigeration Council's Cool Change bulletin says a pressure test and inspection before evacuation is required for all refrigeration and air conditioning piping, at installation or after a service that opens the sealed system. The ARC and AIRAH Refrigerant Handling Code of Practice (2025) holds the leak tightness test pressure for a full day on a new system's commissioning test and for one hour when a repair or replaced component is tested, and says a system with a doubtful leak history must not be recharged until it has been repaired and leak tested. Mitsubishi Electric's MSZ-AP installation manual adds evacuation to 500 microns and a 30-minute test run. For a gas ducted heater, the Building and Plumbing Commission says gas servicing in Victoria must follow AS 4575, and the customer receives the complete servicing record, including the Appendix E checklist with its carbon monoxide test, within 5 days.
Handover closes the job. The same refrigerant code lists what an installer must provide: operating and maintenance instructions including a logbook, commissioning data and test certificates. It also says the customer should be reminded when routine maintenance is due for at least two years after installation, so the handover papers double as the record the next service starts from.


Four trades can be involved in a heating or cooling job, and each does a different part of it. Which of them attend depends on the work: a filter and coil clean needs one, while replacing a gas ducted heater with a reverse cycle system can need all four.
Air conditioning installers fit new systems. On a wall split they mount the indoor unit, bore the wall hole for the pipes (65 mm in Mitsubishi Electric's MSZ-AP manual, falling 5 to 7 mm to the outside so condensate drains away), run and insulate the refrigerant pipe, and set the outdoor unit in a position the manual allows. On a ducted system they hang the indoor unit in the roof space, run flexible ducts to each ceiling outlet, and fit the zone dampers and the wall controller.
Service technicians look after systems that are already running. Their work covers cleaning filters, coils and drains, checking refrigerant pressures (QuickAir's servicing checklist describes this as confirming the charge without assuming it needs more gas), finding the fault when a unit stops heating or cooling, and servicing evaporative coolers, which Seeley International's Breezair manual schedules every two years before summer for a home.
Electricians handle the power side: the dedicated circuit that Mitsubishi Electric's ducted installation manual calls for, the connection at the switchboard, and on a gas ducted heater the power point beside it, which the Brivis Classic installer's manual specifies as a 10 A socket. Gasfitters handle the gas side: connecting a new gas ducted heater to the supply, servicing and testing an existing one, and disconnecting the gas when a heater is removed and replaced with an electric system.

Each trade's work falls under its own rule, and the rule belongs to the work, not to the name on the quote. On a Peak Air Conditioning Brighton job, each part of the work is done under the licence that part requires, and the three rules are set out here so a homeowner can check them.
Refrigerant work comes under the Australian Refrigeration Council. Its licensing FAQ states: "Any person who handles refrigerant or works on RAC equipment must hold a refrigerant handling licence." Handling includes installing, commissioning, servicing or maintaining that equipment whether or not refrigerant is present, and the ARC also issues a restricted licence for split system installation and decommissioning. Mitsubishi Electric's MSZ-AP manual says only technicians with the appropriate ARC licence should install that product, and the ARC's Look for the Tick search lists licensed technicians and authorised businesses.
Gas work needs a licensed gasfitter. Energy Safe Victoria's advice is to always use one for any installation, repair or renovation that involves gas, and Consumer Affairs Victoria describes a registered or licensed gasfitter as a plumber who holds registration or a licence with the Building and Plumbing Commission. The Commission adds that only plumbers registered or licensed in the specialised class of Type A appliance servicing can service a Type A gas appliance, and that installing or replacing one needs a compliance certificate, issued to the customer within five days by a licensed plumber.
Electrical work ends with a Certificate of Electrical Safety. Energy Safe Victoria says the certificate is required by the Electricity Safety Act 1998, is issued by a registered electrical contractor or licensed electrician, and lists air conditioning as non-prescribed work, for which the customer gets a copy within 30 days. Its guidance on working with tradespeople says a homeowner can and should ask to see a tradesperson's licence, and its public registers search electrical contractors, licensed electrical workers and certificates. Rented homes, 23.7% of Brighton's occupied dwellings in the ABS 2021 Census, carry two more checks: Consumer Affairs Victoria requires a gas safety check and an electrical safety check every 2 years, and Energy Safe Victoria notes that the electrical check is recorded on a different form from a certificate.


Three questions settle most bookings: is the job one of the services offered, is the address in a covered suburb, and do the hours suit the household.
Twelve services are offered, in five groups. New systems are covered by air conditioning installation, split system installation, ducted air conditioning and reverse cycle air conditioning. Gas heating has ducted heating and ducted heating service and repairs. Upkeep runs through air conditioning service, aircon cleaning and evaporative cooler service and repairs. Faults go to air conditioning repair or, when a breakdown cannot wait, emergency air conditioning repair, and shops, offices and other premises are covered by commercial air conditioning. Each service page explains what the job involves and quotes the independent Melbourne cost guides where a source gives a figure; how options are then priced in writing is covered on the homepage.
Work covers Brighton itself and 12 nearby suburbs across the Bayside, Glen Eira, Kingston and Port Phillip councils, and each suburb has its own page on its housing and local planning rules: Bentleigh, Brighton East, Caulfield North, Caulfield South, Elsternwick, Elwood, Hampton, Hampton East, McKinnon, Moorabbin, Ormond and Sandringham.
Calls and bookings are taken from 6am to 10pm, Monday to Sunday, and the line is closed overnight, so a fault found late in the evening is booked from 6am the next morning. Noisy work follows EPA Victoria's residential noise rules, which treat repairs and maintenance as residential noise and prohibit electric power tools before 7am and after 8pm on weekdays and before 9am and after 8pm on weekends and public holidays, so drilling and wall coring sit inside those windows even when a call comes earlier or later. The business trades under ABN 56 573 390 615.
GET A FREE QUOTE
BUSINESS
SERVICES
OPERATING HOURS
Sun: 6:00am - 10:00pm
Mon: 6:00am - 10:00pm
Tue: 6:00am - 10:00pm
Wed: 6:00am - 10:00pm
Thu: 6:00am - 10:00pm
Fri: 6:00am - 10:00pm
Sat: 6:00am - 10:00pm