Aircon Cleaning Brighton VIC, Inside the Unit, Not Just the Filter

Aircon cleaning Brighton VIC 3186 goes past the filter to the parts a filter wash never reaches: the coil, the barrel fan and the drain tray inside the indoor unit, where the water made during cooling settles. Mitsubishi Electric's MSZ-AP operating manual tells owners never to wash the inside of the indoor unit and to contact the dealer when it needs cleaning, and Daikin's FTXF manual recommends periodical maintenance by a specialist on top of the owner's own cleaning. Peak Air Conditioning Brighton quotes each wall split, multi-head, cassette or ceiling unit in writing before work starts, with the coil, barrel fan and outdoor unit named on the quote. Prices on this page come from Melbourne cleaners and cost guides, not from the business. Faults found during a clean are reported and quoted as repairs under an ARC refrigerant handling licence. Calls are answered from 6am to 10pm, seven days.

GET A FREE QUOTE

Why Choose Peak Air Conditioning Brighton: Prices in Writing and Seven-Day Hours for Aircon Cleaning

Two things shape how a heating or cooling job in Brighton starts: knowing what each option costs before anything is booked, and finding a visit time that suits the household. Peak Air Conditioning Brighton is set up around both. Prices are put in writing after the site visit, option by option, and the phone line takes bookings for new systems, servicing, aircon cleaning and repairs from 6am to 10pm, seven days a week.

Peak Air Conditioning Brighton

Aircon Cleaning Brighton: Wall Splits, Multi-Head Systems and Cassettes

The type of indoor unit decides how it opens, how long it takes and how it is priced, so it is the first thing confirmed when a clean is booked. YourHome, the Australian Government's sustainable housing guide, describes a fixed split system as an outdoor unit holding the compressor and condenser and an indoor unit holding the evaporator coil and fan, mounted on the wall or the floor, and it describes a multi-head split as more than one indoor unit running off a larger outdoor compressor. Aircon cleaning works on the indoor half, where the coil and fan sit, and clears the outdoor unit as part of the same visit. The ABS 2021 Census counts 57.2% of Brighton's occupied homes as separate houses and 33.1% as having four or more bedrooms, against 73.4% and 32.6% across Victoria; the Census does not count air conditioners, so the number of units in a home is taken from the owner or a photo, not assumed.

Split System Cleaning for High-Wall Indoor Units

Split system cleaning on a high-wall indoor unit is the job that published per-unit prices in Melbourne are written for. Mr Duct Cleaning, a Melbourne cleaner, sets its price list for wall split systems and says other types are quoted separately, so the wall split is the baseline every other unit is compared against. The unit opens from the front. Mitsubishi Electric's MSZ-AP operating manual has the front panel lifted until it clicks, then held at the hinges and pulled off, and Daikin's FTXF operation manual has the panel held by its sides and opened, with each air filter pushed up at its centre tab and pulled down. Behind the filters is the heat exchanger, the block of thin aluminium fins the room air passes through, and below it, inside the air outlet, is the fan that Daikin's manual warns turns at high speed during operation.

Height is part of the job. The MSZ-AP manual recommends mounting the indoor unit between 1.8 m and 2.3 m above the floor, and Daikin's manual asks for at least 1.8 m from the floor to the bottom of the unit, so every clean is ladder work. The Mitsubishi manual warns against standing on an unstable bench to clean the unit, and it draws the line between owner and professional plainly: the filters and front panel are the owner's, and the inside of the indoor unit is a job for the dealer. That inside clean is what the method section below describes, one high-wall unit at a time.

Multi-Head, Cassette and Ceiling Units, Quoted Separately From a Photo

Mr Duct Cleaning quotes multi-head, cassette and ceiling units separately because, in its words, they are built differently, and it asks owners to send a photo of the unit so the price is settled before anyone arrives. Mitsubishi Electric's guide to cleaning an air conditioner filter makes the same distinction from the manufacturer's side: it notes that some air conditioners, such as ducted systems, cassette bulkhead systems and outdoor units, may require professional cleaning methods. The photo shows the cleaner the model, the grille, the access and the height before a figure is given, which matters most where the unit is set into a ceiling.

A multi-head system brings its own planning point. Daikin's FTXF manual notes that refrigerant keeps flowing inside an indoor unit that is switched off while another unit on the same system is running, and both split system manuals ask for the unit to be stopped and the circuit breaker turned off before any cleaning. One outdoor unit serves every head, so the clean is booked for a window when the whole system can be off, and each head is still opened and cleaned as a unit of its own. Ducted systems are different again: the indoor unit sits in the roof, and Daikin's ducted controller manual says the controller flags filter cleaning when the filter is dirty or after a set period of running. The ducts themselves are a separate job from cleaning the unit, covered under ducted heating service and repairs, where duct cleaning sits.

Caulfield North Aircon Cleaning
Brighton East Aircon Cleaning

Peak Air Conditioning Brighton

Air Conditioner Cleaning Method: Wash Bag, Foam, Steam and Rinse

The manufacturers draw a hard line around the inside of the indoor unit. Mitsubishi Electric's MSZ-AP operating manual says the user should never attempt to wash the inside of the indoor unit and should contact the dealer if it needs cleaning, warning that unsuitable detergent can damage the plastic inside and cause water leakage, and that detergent reaching the electrical parts or the motor will cause a malfunction, smoke or fire. Daikin's FTXF manual recommends periodical maintenance by a specialist in addition to the owner's own cleaning. Neither manual sets out the professional method, so the five steps below follow the sequence Mr Duct Cleaning publishes in its 2026 split system cleaning guide, with each step set against what the two manuals rule out. Both manuals ask for the unit to be stopped and the circuit breaker turned off before cleaning begins.

Drop Sheets Down and a Wash Bag Fitted Under the Indoor Unit

The first step protects the room. In Mr Duct's sequence, drop sheets go down and a wash bag is fitted under the unit to catch every drop, and its guide explains why the step cannot be skipped: spraying water or chemicals into the unit without the right covers and a wash bag can push dirt deeper, wet the electrics or bend the fins. The manuals point the same way from the owner's side. Daikin's FTXF manual tells owners not to wash the appliance with water, because of the risk of electric shock or fire, and both manuals warn against keeping furniture, appliances or anything that moisture can damage directly beneath the indoor unit, since water can drip from it.

So the space under the unit is cleared, the floor and nearby furniture are covered, and the bag is shaped to the unit so the water leaving the coil runs into it rather than down the wall or towards the electrical parts. The breaker is off before the bag goes on, as both manuals ask before any cleaning, because the fan inside can turn at high speed. The dust filters come out at this stage, are washed and go back in dry at the end, the one part of the sequence an owner also does between cleans. With the room covered and the filters out, the coil and fan are open to the work that follows.

Cleaning Foam Worked Deep Into the Coil and Fins

The coil is where the cleaning agent does its work. Mr Duct's guide describes cleaning foam going deep into the coil to lift the dirt and mould, and QuickAir, a Melbourne installer, describes its own deep clean as a chemical coil flush plus mould and odour treatment, with the indoor unit stripped and the coils, fan barrel and drain pan washed rather than wiped.

What goes into the coil has limits, and the manuals set them. Mitsubishi Electric's MSZ-AP manual allows only diluted mild detergents and rules out benzine, thinner, polishing powder and insecticide, and Daikin's FTXF manual rules out volatile liquids such as benzine, petrol and thinner, polishing compounds and rough materials such as a scrubbing brush. The Mitsubishi warning about unsuitable detergent damaging the plastic inside the unit applies here most of all. This page names no cleaning product, so an owner can ask which agent will be used and check it against the unit's own manual before the work starts. The fins need care as well: Daikin's manual warns against touching the aluminium fins, Mitsubishi Electric's filter guide has even an owner's vacuum follow the fins vertically, and Mr Duct lists bent fins among the results of cleaning without the right method.

Barrel Fan Brushed by Hand, Blade by Blade

The barrel fan is the fan inside the air outlet that pushes air into the room, and it is the part a filter wash never touches. In Mr Duct's sequence the fan that blows air into the room is brushed by hand, and its guide shows foam and a brush working on the barrel fan as part of every clean rather than as an extra.

Mitsubishi Electric is the one manufacturer read for this page that describes brushing the fan at all. Its filter cleaning guide covers models fitted with a Quick Clean Body, which allows easy fan access: the horizontal vanes are turned down and unlocked, the vertical vanes are swung out, and a brush from its Quick Clean kit is moved along the blades of the fan horizontally. For any other model it says to consult the instruction manual. The MSZ-AP operating manual adds the caution that matters most on this step: excessive force on the fan may cause cracks or breakage. Brushing by hand, blade by blade, keeps the force on the fan low, which is the caution the manual gives. Where a model's fan is harder to reach than on a Quick Clean Body unit, the model number and photo show that before the visit, so the time it takes is known in advance.

Steam Through the Coil and Fan, Then a Low-Pressure Rinse Into the Bag

Once the foam and brushing have loosened the dirt, Mr Duct's sequence sends hot steam through the coil and fan, in its words to disinfect what the foam loosened, and then rinses the unit at low pressure so the dirt goes into the bag, not onto the wall. Its list ends this stage with a step it calls sanitise and deodorise, so that the musty smell is gone rather than covered up. Those are the cleaner's own descriptions of its method; this page makes no claim about germs or hygiene, only about the dirt and the smell leaving the unit.

The low pressure matters. A hard jet would drive water past the bag and bend the fins that the foam step was careful with, which is the damage Mr Duct's warning names. Neither manufacturer manual describes steam or a rinse, because both keep owners away from the inside of the unit altogether. Their water temperature limits, 40°C in Daikin's FTXF manual and 50°C in Mitsubishi Electric's MSZ-AP manual, sit in the owner cleaning sections for parts such as filters and panels. Mr Duct puts the whole clean at around 1 to 2 hours for most units, depending on the size of the unit and how dirty it is, and says a very dirty unit takes longer, with the time given upfront.

Louvres, Casing and Outdoor Unit Cleaned, Then an Airflow and Temperature Test

The visible parts come last. Mr Duct's sequence cleans the louvres and casing, then the outdoor unit, with leaves, dust and cobwebs cleared so it can get rid of heat properly, and it finishes with an airflow and temperature test to confirm the unit is blowing strong and cold before the cleaner leaves. Its guide also describes before and after photos as its own practice. The louvres need a light hand: the MSZ-AP manual says not to soak or rinse the horizontal vane, Daikin's manual says to move the flap only with the remote because forcing it can damage the mechanism, and Mitsubishi Electric's filter guide notes that if the horizontal vane is not refitted correctly, every LED lamp blinks when the power comes back on.

Daikin's FTXF manual explains why the outdoor unit is part of the clean: leaves and debris piled around it are a hotbed for small animals, which can get inside and cause malfunctions, smoke or fire if they reach the electrical parts. The Quote Yard, a Victorian cost guide, names Brighton among the bayside suburbs where outdoor units corrode at the coil and cabinet, and says periodic rinsing of the coil with fresh water slows it considerably. The test then waits on the unit's own start-up: the MSZ-AP manual says the vanes reset for about a minute after the breaker is turned on, and Daikin's manual says a unit run straight after the breaker goes on may take about 3 to 20 minutes to prepare.

Peak Air Conditioning Brighton

Why Choose Peak Air Conditioning Brighton for an Aircon Cleaning Service

A cleaning visit from Peak Air Conditioning Brighton is agreed in writing before work starts and closes with a plain report of anything found that a clean cannot fix. The two sections below set out what the written quote covers and what happens when the open unit shows a fault. The phone line runs from 6am to 10pm, Monday to Sunday, and the cleaning visit is set for a time agreed when it is booked, with no promise of how soon that will be in a busy week. With 23.7% of Brighton's homes rented in the ABS 2021 Census, the person booking may be the owner, the managing agent or the tenant, so the quote names who it is addressed to and who gives access on the day.

A Written Quote That Names the Coil, Barrel Fan and Outdoor Unit

Two cleaning quotes with the same figure can describe very different jobs, and Mr Duct Cleaning's guide gives buyers a list of questions to ask before booking anyone: whether the outdoor unit is included, whether the price includes GST, whether there is a call-out fee, whether the coil and barrel fan are cleaned or only the filters, whether a wash bag is used and the room covered, whether before and after photos are provided, and what happens if a fault is found. A written quote should answer every one of those before the visit, not leave them for the day.

The quote from Peak lists each indoor unit by room, type and make, and states that the clean covers the coil, the barrel fan, the drain tray, the louvres and casing, and the matching outdoor unit. It says whether GST and any call-out are included, how a high or roof-mounted outdoor unit will be reached, and that a wash bag and drop sheets go under every indoor unit. The make and model are there for a practical reason: Mitsubishi Electric's and Daikin's manuals set different limits on water and cleaning agents, and the quote is where an owner can check which ones apply. For multi-head, cassette and ceiling units, the quote follows a photo of the unit, as the Melbourne cleaners describe, so the price is settled before the ladder comes out. Dollar figures for each part of the job are covered in the cost section below.

Faults Found Mid-Clean Reported, With Repairs Under an ARC Licence

A clean opens the unit further than most visits, so it is a good moment to notice a problem, and a poor one to fix it on the spot. Mr Duct's guide is direct on the point: a clean is not a service, regassing and repairs need an ARC licensed technician, and if a fault turns up during a clean the owner is told plainly. The Australian Refrigeration Council puts the licence rule plainly: any person who handles refrigerant or works on RAC equipment must hold a refrigerant handling licence. Mr Duct names the signs that point to a technician rather than a cleaner: the unit blows warm air on cool, shows an error code or ices up.

The manuals give the same list from the owner's side. Mitsubishi Electric's MSZ-AP manual says to stop using the unit and consult the dealer when water leaks from the indoor unit, when the operation lamp blinks, when the breaker trips often, when an abnormal sound is heard or when refrigerant leakage is found. Daikin's FTXF manual lets an owner read the fault code through the remote by holding a button for about five seconds, with codes such as U0 for refrigerant shortage and A5 for high pressure control or freeze-up protection; other brands use their own codes. Whatever is seen during the clean is written into the report, with the code where the unit shows one, and the fix is then quoted separately as an air conditioning repair, carried out under an ARC refrigerant handling licence, with any wiring work done by a licensed electrician.

Bentleigh Aircon Cleaning
Brighton East Aircon Cleaning

Peak Air Conditioning Brighton

What Aircon Cleaning Costs in Brighton VIC

The figures below come from Melbourne cleaners and installers, read on 20 November 2026. They are indicative ranges and published prices from those businesses, not Peak Air Conditioning Brighton's own prices, and they are given per indoor unit because that is how the sources price a clean. A written quote follows a photo or a look at the unit, and the first three sections cover the clean itself, while the last covers the extras that move the price: access to the outdoor unit and call-out fees.

Deep Clean Prices for One Split System Indoor Unit

For one wall split, the sources agree on a band. Mr Duct Cleaning says most Melbourne companies charge about $150 to $200 for one unit, and its own published price is $180 for the first indoor unit, including the outdoor unit and GST. QuickAir's Melbourne cost guide puts a deep clean, chemical wash at $200 to $350, describing it as a chemical coil flush plus mould and odour treatment, and lists its own fixed deep clean of a neglected system at $449, or $439 for returning customers.

The gap between those figures is mostly about what each one includes and how dirty the unit is assumed to be. Mr Duct's figure covers the outdoor unit and GST, and it says that how dirty the unit is does not change its price, only how long the job takes. QuickAir's range is for a system its guide calls neglected, and its own fixed price sits above the market range it quotes. None of these is a price for a multi-head, cassette or ceiling unit, which the cleaners quote separately from a photo. Comparing a quote against these bands only works if the quote names the same parts, which is why the coil, barrel fan and outdoor unit are written into it.

Lower Prices for the Second, Third and Each Further Unit

Cleaning several wall splits in one visit costs less per unit, because the cleaner is already set up in the house. Mr Duct Cleaning's published rates step down after the first unit: $160 for the second, $150 for the third and $140 for each unit after that, still including the outdoor unit and GST. Its guide's own saving tip is to have every unit done in the same visit for that reason.

Those rates are for separate wall splits, each with its own outdoor unit. A multi-head system, where several indoor units share one outdoor unit, is a different build, and the same cleaner quotes it separately, so the sliding rate should not be assumed to apply to it. In Brighton, the ABS 2021 Census counts 33.9% of occupied homes with three bedrooms and 33.1% with four or more, and Mr Duct's guide gives the example of a Melbourne home with a split in the living room and one in the main bedroom, but the Census does not record how many units any Brighton home has. The count of units, and whether each one is a separate split or part of a multi-head system, is what turns these per-unit figures into a total on the quote.

A Deep Clean Added to a Split System Service

Some owners want the clean and a service done on the same day. Climate Control Solutions, a Melbourne installer, publishes both figures side by side for a split system with no faults found: $150 to $250 for a standard service, and $250 to $400 for the service plus a deep clean. The difference between its two figures is the price its guide puts on adding the clean to a visit that is already happening.

Booking both in one visit saves a second trip and a second time at home waiting for a technician, and it means the unit is opened once for both jobs. The refrigerant side of a service needs an ARC refrigerant handling licence, so the quote says that part is done by a licensed technician. What a service checks, and how it differs from a clean, is set out in the comparison section below rather than here.

Outdoor Units Above Two Metres and Minimum Call-Out Fees

Access to the outdoor unit is the extra most likely to move a cleaning price. Mr Duct Cleaning's price covers an outdoor unit no more than 2 metres above the ground with safe, clear access; a unit high on a second-storey wall or on a roof needs extra equipment, so an extra charge may apply, and a unit in a tight or difficult spot takes longer and may cost more. None of the pages read for this section on 20 November 2026 gives a dollar figure for high, roof or hard-to-reach access, so none is given here; it is priced on the quote once the position is known from a photo or a look.

Call-out fees are the other extra. Mr Duct says a minimum call-out fee may apply depending on where the customer is. QuickAir's Melbourne cost guide says many operators add a call-out fee of $60 to $100 on top for customers who are not existing ones, and calls it easy to miss in a quote. If the clean turns into fault-finding, a repair call-out is a separate charge: The Quote Yard's Melbourne table gives repair call-out fees from $120 to $280 across its five Melbourne regions, and its suburb list, read on 20 November 2026, puts Brighton under Bayside & Peninsula, which has no fee row of its own, so the call-out is confirmed at the quote.

Peak Air Conditioning Brighton

Deep Clean Versus a Budget Spray Deal or a Regular Service

Owners comparing cleaning offers are usually weighing three things: a cheap advertised deal, a full deep clean, or a regular service that already includes some cleaning. The three sections below set out what each one does and does not reach inside the unit, and where a drying mode on the remote fits in. Prices for each are in the cost section above.

Budget Deals: A Filter Wash and Spray That Leave the Coil Dirty

Mr Duct Cleaning's guide describes split system deals advertised well under $100 and says most of them cover a filter wash, a wipe of the cover and an antibacterial spray. That, in its words, leaves the coil and the barrel fan dirty, and those are the parts that grow mould and cause the smell in the first minute after the unit is turned on. It adds that a spray can make the room smell better for a few days, but it does not take the dirt out of the unit, so the smell comes back and the owner pays again.

The manufacturer manuals add a reason of their own to be wary of the spray. Mitsubishi Electric's MSZ-AP operating manual tells owners not to use insecticides, flammable sprays, air refreshers or antibacterial agents on the unit, because they may cause a fire or deform the unit, and Daikin's FTXF manual warns against using flammable sprays near the appliance. On those models, a deal built around a spray runs against the maker's own instructions while leaving the dirt where it was. The filter wash in such a deal is real work, but both manuals hand it to the owner every couple of weeks. What a budget deal sells, in effect, is the owner's own job plus a spray, with the coil and fan untouched.

A Clean Is Not a Service: Refrigerant and Electrical Checks Are Separate

A deep clean and a service are two different jobs, and Mr Duct Cleaning's guide sets them side by side. A clean washes the filters, foams and steams the coil and fins, scrubs the barrel fan and removes the mould and musty smell from the unit. A service usually washes the filters but not usually the coil, fan or smell; its work is the refrigerant, checked or regassed by an ARC licensed technician, and electrical faults repaired. The guide puts the line simply: a unit that blows warm air on cool, shows an error code or ices up needs a licensed technician, not a cleaner.

Energy.gov.au, the Australian Government's energy advice site, describes the same split from the owner's side: book a regular service by a licensed technician to keep the appliance running efficiently, and wipe down and clean filters and dust around the indoor and outdoor units in between servicing. A clean does not replace the checks a service makes on the refrigerant and the electrics, and a service does not usually take the coil and barrel fan apart the way a clean does. The checks, timing and cost of a routine visit are covered under air conditioning service. For a unit that has both a smell and a fault, the clean and the service are booked as two jobs, or together on the combined visit described in the cost section.

Self Clean Drying Modes Versus a Hands-On Deep Clean

Several manufacturers build a drying function into the unit, and the clearest statement of what it can and cannot do comes from Daikin. Its FTXF operation manual describes MOLD PROOF operation as a function that reduces the spread of mould by using fan operation to lower the humidity inside the indoor unit. Once it is set, by holding the button on the remote for 2 seconds, it starts by itself after COOL or DRY operation stops and switches off 60 minutes later, though it may not run if cooling ran for less than about 5 minutes. The same manual then says, in so many words, that the function is not designed to remove existing dust or mould.

Mitsubishi Heavy Industries, a different company from Mitsubishi Electric, describes its Self Clean operation as designed to dry the internal components, including the fan and filters, recommends running it every few weeks and says it is started from the remote. It also treats the fan in its split systems with an anti-microbial finish that it says helps inhibit the growth of odour-causing mould; that is a feature of its own models only. Mitsubishi Electric's MSZ-AP manual recommends running fan mode after cooling or dry mode to dry the inside, and Mr Duct gives owners the same tip. A drying mode slows new growth on a clean coil. It does not lift what is already stuck to the coil and the fan, which is the job the foam, brush and rinse are for.

Bentleigh
Brighton East Aircon Cleaning

Peak Air Conditioning Brighton

Signs a Split System Needs Cleaning: Smells, Black Specks and Weak Airflow

The signs below describe the unit, not anyone's health. Each one is about what can be seen, smelt or felt from the air conditioner itself, and the Victorian Government's Better Health Channel advises seeking medical advice for anyone concerned about the effects of mould. A single sign is enough to look closer; Mr Duct Cleaning says any one of them is enough to book a clean, but most also have an innocent cause worth ruling out first.

Condensation on the Coil, Barrel Fan and Drain Tray: Where the Grime Builds

The cause of the build-up is the job the unit does. Mr Duct Cleaning's guide explains that a split system makes water every time it cools, that the water sits on the coil, the barrel fan and in the drain tray, and that a damp, dusty unit is exactly where mould and bacteria grow. The Better Health Channel's mould page gives the general rule behind that: mould only grows where there is enough moisture on a surface or humidity in the air. A cooling unit supplies that moisture each time it runs, which is the point of Mr Duct's explanation.

The manufacturers name the conditions that make it worse. Mitsubishi Electric's MSZ-AP manual warns that dirty filters cause condensation in the air conditioner that contributes to the growth of fungi such as mould, which is why it asks for the filters to be cleaned every two weeks. It also warns against running the unit for more than 4 hours at high humidity, 80% relative humidity or more, or with a window or outside door left open, because the condensation may drip and contribute to fungal growth. Daikin's FTXF manual sets the same 80% indoor humidity ceiling for cooling and dry operation and says dew may form and drip outside it. The coil, the fan and the tray are where the water collects, so they are where the deep clean is aimed.

A Sour Smell in the First Minute After Switching On

Mr Duct Cleaning lists a musty or sour smell in the first minute after the unit starts as one of the signs it sees most on Melbourne jobs, and it ties the smell to the coil and barrel fan, the damp parts a filter wash leaves behind.

Both manufacturer manuals list a second cause to rule out. Mitsubishi Electric's MSZ-AP troubleshooting table, under air that smells strange, asks whether the filters are clean and whether the fan or heat exchanger is clean, and adds that the unit may draw in an odour clinging to the wall, carpet, furniture or fabrics and blow it back out. Daikin's FTXF manual says the room odour absorbed in the unit is discharged with the airflow and recommends having the indoor unit cleaned, and it lists odour among the results of running with dirty filters. Either way, the manuals point to a clean of the filters and the inside of the unit. A burning smell is a different matter: both manuals say to stop the unit, turn off the breaker and contact the dealer, because it is a fault, not a cleaning sign.

Black Specks on the Louvres or the Wall Around the Outlet

Mr Duct Cleaning lists black specks or dark marks on the louvres, or on the wall around the outlet, among its signs that a unit needs a clean. The Better Health Channel describes what mould on a surface often looks like: a fuzz, or a stain, smudge or discolouration, most commonly black, green or white.

Not every mark is growth, and the manuals say so. Mitsubishi Electric's MSZ-AP troubleshooting table explains that smudges on the ceiling and walls around the indoor unit come from dust in the air carried by the unit's circulation, and it notes that an aluminium fin on the edge of the heat exchanger that looks burnt is coating resin discoloured by welding heat during manufacture, with no effect on performance. So a dark patch on the wall above the unit may be dust, and a dark fin edge may be factory finish, while marks on the louvres themselves are the ones Mr Duct links to a unit that needs a clean. The clean is where the difference is settled: with the panel off and the fan in view, the cleaner can see whether the marks carry on into the barrel fan and coil. No marks need to be scraped off by the owner first; for the owner, both manuals stop at wiping the panel and casing with a soft cloth.

Weaker Airflow, Slower Cooling and Higher Power Bills

Mr Duct Cleaning's list ends with performance: weaker airflow than the unit had last summer, a room that takes longer to cool, and higher power bills for the same cooling. Mitsubishi Electric's filter guide names reduced airflow and higher electricity bills as signs too, alongside unusual odours, and energy.gov.au advises keeping the indoor units dust free and cleaning filters and dust around the indoor and outdoor units to improve efficiency between services. No source read for this page puts a reliable figure on how much a clean saves, so none is given.

The manuals give owners checks to make before blaming dirt. Mitsubishi Electric's MSZ-AP table, for a room that cannot be cooled or heated enough, asks whether the temperature and fan settings are right, whether the filters, fan and heat exchanger are clean, whether anything blocks the air inlet or outlet of either unit, and whether a window or door is open. Daikin's FTXF table adds a low airflow setting such as quiet mode, furniture directly under or beside the indoor unit, and an exhaust fan running. If those check out and the filters are clean, the coil and barrel fan are the next suspects, and that is a cleaning job. If the unit blows warm air on cool, shows a code or ices up, it is a fault for a licensed technician, as the faults section above explains.

Peak Air Conditioning Brighton

How Often Split Systems Need Cleaning: Yearly, Overdue or Between Visits

This section is about how often the inside of a unit needs a deep clean, which is a different question from how often it needs a service. No manufacturer manual read for this page gives a number of years for a professional clean: Daikin's FTXF manual recommends periodical maintenance by a specialist, and Mitsubishi Electric's filter guide asks owners to clean the heat exchanger themselves at least once every season. The three timings below come from a Melbourne cleaner's guide and the manufacturers' owner instructions, attributed to each.

Once a Year, Booked in Spring Before the Cooling Season

Mr Duct Cleaning's guide gives the plainest rule: allow 1 to 2 hours per unit, once a year, best booked in spring before the summer rush. It adds that a unit running most days, or a home with pets, should not stretch the clean past a year. That is a cleaner's view, not a regulation or a manufacturer requirement, and the guide's own reasoning is practical: a filter wash cannot reach the coil or the barrel fan, so once a year is when those parts get done.

Spring timing follows from where the dirt comes from. The water that settles on the coil, fan and drain tray is made when the unit cools, so the clean is most useful just before the months of heaviest cooling, when the coil is about to be wet for hours at a time. A unit cleaned in spring goes into summer with the build-up from the previous year removed. Energy.gov.au gives similar timing advice for servicing, a regular inspection before peak use such as late spring or autumn, and a household that wants both jobs done can book them together on the combined visit described in the cost section. Mr Duct also notes the scheduling side: in spring an owner gets the day they want instead of waiting in the summer rush with a smelly unit.

Not Opened Up in 12 Months: Overdue for a Clean

Mr Duct Cleaning lists one sign that needs no smell or specks at all: the unit has not been opened up and cleaned in the last 12 months. The point of the sign is the words opened up. A filter wash by the owner does not count, because it stops at the front of the coil, and Mr Duct's own comparison table says a service does not usually foam and steam the coil or scrub the barrel fan either. A unit that has been serviced every year can still be overdue for a clean.

The manufacturer manuals explain why time alone is a reason. Daikin's FTXF manual says that in certain operating conditions the inside of the unit may get foul after several seasons of use, resulting in poor performance, and Mitsubishi Electric's MSZ-AP manual says dirt or dust in the unit may create an unpleasant odour, contribute to fungal growth or clog the drain passage. Neither sets a month count, so the 12 months is the cleaner's yardstick. For an owner who cannot remember when the unit was last opened, the easiest test is the clean itself: the state of the coil and fan once the panel is off shows how overdue it was, and that sets the timing for the next one.

Filters Every Two Weeks in Peak Season, Done Between Cleans

Between deep cleans, the filters are the owner's job, and the manufacturers set the pace. Mitsubishi Electric's filter guide says that for regular home use the filters should be cleaned every two weeks during peak seasons, and that for light seasonal use once a month may be sufficient. Daikin's FTXF manual recommends about every two weeks as well. The routine is short: stop the unit and switch it off, which Mitsubishi Electric notes is generally done at the main isolation switch on the outdoor unit, open the front panel, take the filters out, and remove light dust with a low-power vacuum or wash heavier dirt off in lukewarm water. Daikin's manual adds neutral detergent thinned in lukewarm water for dust that will not shift, and both makers say to dry the filters in the shade.

Mr Duct Cleaning's between-clean list fills in the rest: wipe the louvres and cover with a dry cloth, keep the outdoor unit clear of plants, leaves and rubbish, and run the unit on fan only for a while after cooling to help dry it inside. Energy.gov.au gives the same advice in its own words, wiping down vents, filters and louvres and avoiding harsh cleaning fluids. The last line on Mr Duct's list is the one that protects the deep clean: leave the coil and the barrel fan alone. Daikin's manual warns against touching the aluminium fins even while taking out a filter. Mitsubishi Electric's manual links dirty filters to condensation and fungal growth inside the unit, so the two-weekly routine is what protects the result of the yearly clean between visits.

Bentleigh

TESTIMONIALS

What Our Aircon Cleaning Customers Say About Us

The Process

3 Step Process For Your Aircon Cleaning Needs

Site Visit

After the first call, a technician visits to look at the rooms to be heated or cooled, the walls, roof space or subfloor where equipment could go, the switchboard and any gas supply. The Victorian Energy Upgrades buyer's guide advises having installers check what size suits the home, because a system that is too large can use more energy and cost more to run.

Written Quote

The written quote names the system and its heating and cooling capacity, the unit positions, the pipe or duct route, any electrical or gas work, any approvals needed and the price of each option. Where a VEU discount applies, an accredited provider applies it before work starts, because the energy.vic.gov.au page says retrospective discounts are typically not possible.

Installation Day

The units are fitted, and the refrigerant pipework is pressure tested and evacuated before the system is charged. A licensed electrician does the wiring and issues a Certificate of Electrical Safety, and any gas work is done by a licensed gasfitter. Handover covers the modes, filter cleaning and the documents to keep.

FREQUENTLY ASKED QUESTIONS

Aircon Cleaning In

Everything you need to know about our Aircon Cleaning In

How much does aircon cleaning cost?

Mr Duct Cleaning, a Melbourne cleaner, says most Melbourne companies charge about $150 to $200 to clean one wall split, and QuickAir's Melbourne cost guide puts a chemical deep clean at $200 to $350. Those are indicative figures from Melbourne businesses, not a fixed price, and they are per indoor unit. Several separate splits cleaned in one visit usually cost less each, while multi-head, cassette and ceiling units are quoted separately, usually from a photo. A high or roof-mounted outdoor unit, or a call-out fee, can add to the total, so the written quote states both.

How often should you wash your aircon?

Start with the filters, which the owner washes. Mitsubishi Electric says every two weeks during peak seasons and once a month for light seasonal use, and Daikin's FTXF manual also recommends about every two weeks. The inside of the unit is a different job: Mr Duct Cleaning recommends a professional clean of the coil and barrel fan once a year, best booked in spring before summer. That yearly figure is a cleaner's recommendation, not a manufacturer rule, and a unit running most days may need it sooner.

What's the best way to clean an air conditioner?

Split the job in two. The owner's part is the filters and front panel: switch the unit off at the breaker, take the filters out, vacuum them or wash them in lukewarm water with a diluted mild detergent if needed, dry them in the shade, and wipe the louvres with a dry cloth. Mitsubishi Electric and Daikin both rule out benzine, thinner and polishing powder or compounds. The coil and barrel fan are the professional's part, cleaned with drop sheets down and a wash bag under the unit, as the method section above describes. Mitsubishi Electric's MSZ-AP manual says owners should never wash the inside of the indoor unit themselves.

How long does a split system clean take?

Mr Duct Cleaning puts a clean at around 1 to 2 hours per unit, depending on the size of the unit and how dirty it is, and says it gives a time estimate before starting. A home with several wall splits takes roughly that time for each one. None of the sources read for this page gives a time for a multi-head, cassette or ceiling unit, so that time is estimated on the quote from a photo of the unit. A high outdoor unit that needs extra equipment can add to the visit as well.

Why does my aircon smell when I turn it on?

Usually because of water. Mr Duct Cleaning explains that a split system makes water every time it cools, and that water sits on the coil, the barrel fan and in the drain tray, where mould and bacteria grow in a damp, dusty unit; the smell is strongest in the first minute after start-up. Daikin's and Mitsubishi Electric's manuals add that a unit can also absorb room odours and blow them back out. A spray only masks the smell for a few days, while a deep clean removes the dirt on the coil and fan. A burning smell is different: stop the unit, turn off the breaker and call for a technician.

Can I clean the coil and barrel fan myself?

Only in a very limited way. Mr Duct Cleaning's advice to owners is to leave the coil and the barrel fan alone, because spraying water or chemicals into the unit without covers and a wash bag can push dirt deeper, wet the electrics or bend the fins. Mitsubishi Electric's MSZ-AP manual says owners should never wash the inside of the indoor unit, though its filter guide allows a gentle vacuum of the coil along the fins after the unit has been off for at least 5 hours, and fan brushing only on models with a Quick Clean Body. Daikin's manual warns against touching the aluminium fins at all.

Request A Free Aircon Cleaning Quote

GET A FREE QUOTE