Air conditioning Brighton East owners ask about depends on the age of the house. Bayside City Council's Brighton East Urban Forest Precinct Plan 2024 describes Californian Bungalows, post-war modern and art deco homes, infill from the 1980s and 90s, and newer double-storey homes or dual occupancies, and the ABS 2021 Census counts 67.9% of occupied dwellings as separate houses and 23.8% as semi-detached, row or townhouses. Peak Air Conditioning Brighton installs split, multi-head and ducted systems and reverse cycle heat pumps, services gas ducted heaters and evaporative coolers, cleans split systems and finds faults, on the Bayside side of the suburb and on the Glen Eira strip along Thomas Street. This page covers each job by house type, the tree and heritage rules that shape an install, and indicative Melbourne prices. Phone between 6am and 10pm on any day of the week.
GET A FREE QUOTE
Two things shape how a heating or cooling job in Brighton starts: knowing what each option costs before anything is booked, and finding a visit time that suits the household. Peak Air Conditioning Brighton is set up around both. Prices are put in writing after the site visit, option by option, and the phone line takes bookings for new systems, servicing, aircon cleaning and repairs from 6am to 10pm, seven days a week.

Bayside's precinct plan says Brighton East's original dwellings are single-storey, while new developments are generally built as double-storey homes or dual occupancies, and that most of the suburb's housing land sits in the Neighbourhood Residential Zone, which has a maximum building height of two storeys. One street can therefore hold an inter-war bungalow beside a recent rebuild, and the right system changes from lot to lot. The three parts below follow the house type. Heating capacity in kilowatts is left to the heating section, so this section deals only with layout and cooling.
The precinct plan dates Brighton East's Californian Bungalows to the inter-war years and records that the land was subdivided for housing between 1922 and 1928, with the street pattern set by the late 1930s. These houses were built as single-storey homes, and the plan describes front setbacks of 5 to 8 m and side setbacks of 1 to 1.5 m on one side, with the garage and driveway running to the boundary on the other. That plan suits a wall split in each main room rather than one central system: the living room first, then the main bedroom, each indoor unit with its own outdoor unit in the narrow side passage or beside the driveway. On an older facade the pipe run is the part people see. Mitsubishi Electric's MSZ-AP installation manual says the refrigerant piping must be embedded or protected against damage, and it allows flare connections outdoors only, with no flared joints or reusable mechanical connectors inside the house. Running the covered pipe down a side wall, rather than across the front, keeps the street view of a bungalow or art deco house as it was, which also matters where a Heritage Overlay applies (covered further down this page). Bayside's plan adds that gardens here are mostly established exotic plantings, so the outdoor position is chosen clear of shrubs that would crowd the coil. The split system installation page sets out brackets, pipe insulation and commissioning step by step.
Post-war modern houses are the next layer of the suburb's housing in the precinct plan, and Bayside's heritage schedule now lists several of them in their own right. Where three or four rooms need conditioning and the side passage has space for only one condenser, a multi-head system serves those rooms from a single outdoor unit. Mitsubishi Electric's multi-head page says that the larger the outdoor unit's capacity, the more indoor units it can take: its MXZ range runs from a two-port 5.2 kW model to a six-port 12.0 kW model. The outdoor unit's output is shared between the indoor units running at the same moment. Mitsubishi's own example puts an MSZ-AP35 and an MSZ-AP50 on an MXZ-4F71: with both cooling, they give up to 2.8 kW and 4.0 kW, while the MSZ-AP50 running alone gives its full 5.0 kW. The same page notes that, because of building layout and occupancy, both units often do not need to run together, which is why the heads are matched to the way the house is lived in. Each room keeps its own set temperature, but every head runs in the same mode, so one room cannot heat while another cools. Two behaviours belong to multi-heads alone: the MSZ-AP operating manual says an idle indoor unit can warm slightly and sound like flowing water while others run, and that Night Mode does not lower outdoor noise during multi-system operation. As a general rule of how a shared outdoor unit works, a fault in it stops every room on the system, which is the trade-off against separate splits.
The precinct plan says new development in Brighton East is usually an alteration or addition, a new detached dwelling, or a dual occupancy built in place of the original house. The ABS 2021 Census counts 23.8% of the suburb's dwellings as semi-detached, row or terrace houses or townhouses, against 13.9% for Victoria. In a dual occupancy each dwelling is given its own system and its own outdoor unit, with separate controls, so neither household's settings depend on the other's. Ducted cooling suits a double-storey rebuild with a usable roof space: Daikin describes its ducted reverse cycle range as suited to large homes and multi-level properties, and whatsthedamage says two-storey homes and complex layouts sit at the top of its ducted price range. Where the upper floor needs control of its own, zoning does that job. Mitsubishi Electric's ducted page gives its Zone Controller up to 4 or 8 zones, while its May 2026 brochure says 4 or 10, so the count is confirmed for the chosen model on the quote. A narrow double-storey dwelling with little roof space takes wall splits instead, room by room on each floor. That works within the MSZ-AP manual's maximum pipe length of 20 m and maximum height difference of 12 m between indoor and outdoor units, and whatsthedamage notes that an outdoor unit on a second-storey bracket or the roof adds labour and pipe to the job. Where the two dwellings share common property, the owners corporation rules decide where each outdoor unit may sit, and that is settled before the positions are drawn up.
Three things around a Brighton East house shape where the equipment goes: the paving and driveways that hold heat, the trees that council and state rules protect, and the heritage listings. Bayside's adopted precinct plan records tree canopy cover of about 16.5% and says the Heritage Overlay is the only one of the vegetation, landscape and heritage overlays that applies to private land in the suburb. The three parts below take each in turn, and each closes with the council to check with.
Bayside's precinct plan reports urban heat data captured in 2018. The results were relatively moderate, with impacts in the eastern and central areas of the suburb, which the plan puts down to larger areas of impervious hard surfaces and a low share of understorey planting. Its implementation plan names hot-spot streets for more planting, among them Northern Avenue, Eric Street, Charles Street, Lansdown Street, Taylor Street, Weber Street, Valanne Street, Hodder Street and Beltane Avenue. Many lots also have a driveway to the boundary on one side, the plan says, so the obvious outdoor position is often on concrete or paving in the sun. energy.gov.au suggests asking an ARCtick technician about the best position for the unit, including shelter from the afternoon sun for the outside unit. Mitsubishi Electric's MSZ-AP installation manual asks for a position where air flow is good and dustless, where rain or direct sunlight can be avoided as much as possible, and where neighbours are not annoyed by operating sound or by hot or cool air, which matters across a 1 to 1.5 m side setback. Shade has to leave the coil room to breathe: The Quote Yard says anything restricting airflow around an outdoor unit raises operating pressures and cuts efficiency, and it names garden growth, stacked items and fence panels built too close. So the visit compares the sunny driveway spot with a shaded side or rear wall, checks the clearances the model's manual sets, and puts the unit where it stays out of the afternoon sun without being boxed in.
Three layers of tree rules can apply in Brighton East. The first is state-wide: Clause 52.37 of the planning scheme, read today in its September 2026 version (Amendment VC315), defines an existing canopy tree as one at least 5 m high with an average canopy diameter of at least 4 m. In the Neighbourhood Residential Zone a permit is needed to remove, destroy or lop one, and on a lot with an existing house that applies to a boundary canopy tree, whose trunk sits within 6 m of the narrowest street frontage or 4.5 m of the rear boundary. The second is the council's own law, and here Bayside's pages, read on 20 November 2026, point two ways. Its permit guide still lists a Local Law permit for trees with a trunk circumference over 155 cm measured 1 m above the ground, while its application page says that from 1 November 2026 only trees on the Significant Tree Register were to need one. The third is heritage: Bayside's schedule applies tree controls to Landcox Park, to the remnant plantings in the Union Street reserve between Thomas Street and Hawthorn Road, and to 120 South Road, listed with a Moreton Bay fig and two bunya pines. On the Glen Eira strip, Glen Eira's Canopy Tree Protection Local Law covers trees taller than 5 m with a trunk circumference of 140 cm or more measured 140 cm up, and it needs a permit for works in such a tree's protection zone, defining works to include trenching, digging and installing a structure. On the job, that keeps a cable trench, a condenser slab and ladder footings outside the root zone, and leaves any lopping to reach a roof cooler or roof space for an arborist and the council to answer first. Check with Bayside City Council or Glen Eira City Council before any branch is cut.
The two planning schemes use the same words. Clause 43.01-1, read in both the Bayside and Glen Eira schemes through the State planning schemes portal on 20 November 2026, requires a permit for domestic services normal to a dwelling if they are visible from a street (other than a lane) or a public park, and Clause 73.01 names an air conditioner, cooling or heating system among those services. Bayside's Clause 43.01-4 exempts such an application from public notice and from objectors' review rights. Bayside's schedule has 34 rows naming Brighton East, some of them as East Brighton. They include three residential precincts, Berkeley Grove (HO650), Cheeseman Avenue (HO653) and Palmer Avenue (HO757); St John's the Less on Hawthorn Road, also on the Victorian Heritage Register (HO203); and five post-war places with September 2025 statements of significance on Clive Street, Clonaig Street and Meyer Court, Davey Avenue, Roosevelt Court and Sara Avenue, places that Amendment C192bays had proposed. Bayside's heritage page says a planning permit may be required for works in the overlay and asks owners to contact the council first; it gives no air conditioner rule. Glen Eira's schedule names one Brighton East place, HO170 on Thomas Street, and its Heritage Overlay controls page says domestic services need no permit as long as they are not visible from a street (other than a lane) or public park, without naming air conditioners. Read with the clause, an outdoor unit at the rear or behind a side wall out of view keeps out of the permit trigger, while one in view of the street or a park starts with the council. Look the address up on VicPlan and check with the council before the unit goes in.


The ABS 2021 Census records 40.6% of Brighton East homes as owned outright and 34.2% as owned with a mortgage, with 19.5% rented against 28.5% for Victoria, so most systems here are bought by the people who will live with them. Wikipedia describes Brighton, the suburb Peak Air Conditioning Brighton is named after, as Brighton East's neighbouring community to the west. The three parts below cover what an owner-occupier can check before booking: what one booking covers, who holds which licence, and when visits can happen.
A Brighton East house can run three kinds of plant at once: wall splits or a multi-head for cooling and heating, a gas ducted heater in the roof or under the floor, and an evaporative cooler on the roof. energy.gov.au notes that ducted gas heating can be paired with a ducted evaporative cooler for year-round control, although a reverse cycle system may be more practical. One booking can cover all three, with each system given its own checks and its own line on the written record, so a gas heater service is not folded into a split clean. Each system also has its own manufacturer schedule to keep: Brivis's heater schedule runs at two-year intervals, Seeley's residential cooler schedule is every two years before summer, and a split follows its own manual. The written quote names each item separately: the model and kilowatt rating of any new unit, the unit positions and pipe route, the service items for each existing system, and any approval the work depends on, such as a heritage check or a tree permit. Where one system is near the end of its life, its repair-or-replace choice is priced beside the service of the others, so the owner can see the whole house at once. Manufacturer warranty applies when a system is installed to the manufacturer's requirements, and each record is kept with the warranty booklet it belongs to.
Each kind of work on a Brighton East house falls under its own licence, and each one can be checked on a public register. Refrigerant work comes first. The Australian Refrigeration Council says any person who handles refrigerant or works on refrigeration and air conditioning equipment must hold a refrigerant handling licence, and energy.gov.au says installers must be licensed through the ARC and can be verified through its online licence check portal. Ask for the technician's ARC licence number and search it there. Electrical work is second: a new circuit for a split or a ducted unit is done by a licensed electrician, and Energy Safe Victoria says to engage a registered electrical contractor and get a Certificate of Electrical Safety for the work. Ask for the certificate after the job and check the contractor on ESV's public registers. Gas work is third. A gas ducted heater service needs a gasfitter registered or licensed with the Building and Plumbing Commission in the Type A appliance servicing class, which the Better Health Channel says can be checked on the BPC website or on the gasfitter's licence card. Brivis's manual adds that the authorised person will issue any compliance certificates required for the work. On this business's jobs, refrigerant work is done under an ARC licence, wiring by a licensed electrician who issues the certificate, and gas work by a licensed gasfitter registered with the BPC. Ask for each number before booking and check it on the register named here.
Calls and bookings run from 6am to 10pm every day of the week, which lets a quote visit fit before work, after school pick-up or on a weekend. That matters in a suburb where couples with children are the largest household group, at 35.2% in Bayside's precinct plan. Not every task suits every hour. EPA Victoria's residential noise page (updated 4 November 2026) counts repairs and maintenance to an existing building as residential noise and prohibits electric power tools and air compressors on weekdays before 7am and after 8pm, and on weekends and public holidays before 9am and after 8pm. Drilling a wall for a pipe run or cutting into a ceiling falls in that group, so installation work is booked inside those hours. Early-morning and evening slots suit quote inspections, roof space measurements and quiet checks of controls and filters instead. For the 19.5% of homes that are rented, Consumer Affairs Victoria says a rental provider entering for repairs must give at least a full day's notice and may enter only between 8am and 6pm and not on a public holiday, unless the renter agrees otherwise, so a tenanted job is timed with the landlord, agent and renter together. The booking confirms the arrival window, the work planned and whether anyone needs to be home to open the roof hatch or the side gate.
Wikipedia gives Brighton East's boundaries as the Nepean Highway in the north-west and south-east, North Road in the north, Thomas Street in the east and South Road in the south, and says that while most of the suburb is in the City of Bayside, a number of properties on Thomas Street are in the City of Glen Eira. It also names the suburb's large parks, Dendy Park, one of Victoria's 10 biggest parks and outdoor recreation areas, Hurlingham Park and Landcox Park. The three parts below cover the shopping centres, the streets around those parks and the Glen Eira strip.
Bayside's Small Activity Centres Strategy (updated March 2019) lists Hawthorn Road Shopping Centre with 22 ground-floor premises as at 2014, a mix of convenience and destination shops that also provides office accommodation for small businesses. Its urban design guidelines describe fine-grain shopfronts on the east side, a more varied west side and canopies over the footpaths on both sides. East Brighton Shopping Centre has 17 premises in buildings of one to two storeys, including a small supermarket on the east side of Hawthorn Road, beside the route 64 tram terminus. The strategy also lists the Nepean Highway and Milroy Street centre for warehousing and showrooms, and a Thomas and Egan Street centre of local services and offices. The Building and Plumbing Commission sorts such premises by building class: Class 5 for offices, Class 6 for shops, cafes and milk bars, and Class 7 for storage or display of goods. For a single shop or office, Mitsubishi Electric's light commercial range includes wall-mounted units, ceiling cassettes that it says suit open-plan offices and retail with four-way airflow, and under-ceiling units for premises without ceiling space. The canopies over the footpaths leave little room for plant on the shopfront, so the roof and the rear wall are checked first. Bayside's Clause 43.01-1 also covers heating and cooling systems on buildings other than dwellings in a Heritage Overlay where they are visible from a street or public park, and the schedule rows on Hawthorn Road name a residence, a church and St John's the Less rather than the shops; ask Bayside about any listed site. The commercial air conditioning page covers maintenance and multi-unit sites.
Bayside's precinct plan says the council established a public golf course and Dendy Park in 1943, with ovals and sports facilities. OpenStreetMap places Studley Road, Breen Drive, Bourneville Avenue and Burwah Avenue within about 70 m of Dendy Park's edge. Hurlingham Park is edged by Palmer Avenue and Francis Street, with Hurlingham Street and Berkeley Grove within about 50 m, and Landcox Park by Mavis Avenue, with Sunnyside Avenue close by. Two of those streets carry their own heritage precincts in Bayside's schedule, Berkeley Grove (HO650) and Palmer Avenue (HO757), and that is where the park matters to an install. Clause 43.01-1 counts a public park the same as a street, so an outdoor unit on a side wall that faces Hurlingham Park can trigger a permit even when it is hidden from the road. Landcox Park itself carries tree controls (HO718), and the precinct plan lists its heritage trees as Canary Island pines, maritime pines, Moreton Bay figs, Monterey cypress and eucalypts, so a pipe run or slab along a boundary shared with the park is kept well clear of their roots. Bayside's urban design guidelines describe a low-scale, mostly detached housing form in garden settings north of East Brighton Shopping Centre, but the sources do not record the house type on each of these streets. The visit confirms whether the house is a bungalow, a post-war home or a rebuild, and the earlier sections of this page set out the system each one usually suits.
The Glen Eira part of Brighton East is small. An OpenStreetMap check of the council boundaries, run on 20 November 2026, puts about 2.4% of the suburb's area in Glen Eira, as a narrow strip along Thomas Street on the eastern edge that widens at its southern end around Victor Road. Points inside it resolve to Thomas Street, Victor Road, Hopkins Street, Hastings Street and Bevan Street. Glen Eira's own planning scheme confirms the strip: its Development Plan Overlay Schedule 1 covers 2 Victor Road, Brighton East, and requires a development plan that sets the maximum number of dwellings, the building envelopes, vehicle access from Brewer and Victor Roads and north and south garden courts. The schedule does not say whether that site has been built out, but a multi-dwelling site of that kind is one where each dwelling takes its own system, and outdoor positions are agreed with the owners corporation where there is one. Glen Eira's heritage schedule names one Brighton East place, HO170 on Thomas Street. On this side of the line Glen Eira's rules apply, not Bayside's: its Heritage Overlay controls page and its Canopy Tree Protection Local Law, both described above. The street itself appears in Bayside's list of urban heat hot spots, so outdoor units on both sides of Thomas Street get the same shading check. A property on Thomas Street can sit on either side of the council line, so check the rates notice or VicPlan to see which council an address belongs to before any permit question is asked.


energy.gov.au lists both electric reverse cycle air conditioners and ducted gas heating among the heating choices for a home. It says reverse cycle systems on the Australian market are 300% to 600% efficient, because they move heat rather than make it, and that ducted systems, though less efficient than wall units, are more cost-efficient than gas heating. It describes ducted gas as expensive to operate, through gas use and the electricity for its fans, but effective and able to be zoned to only the rooms needed. Brighton East's postcode, 3187, spans more than one climate zone, and the Energy Rating calculator allocates it to the Cold zone. The two parts below cover sizing for a family house, then steady daytime warmth.
Bayside's precinct plan, drawing on 2021 census data, names couples with children as Brighton East's most common household type, at 35.2% of households. The ABS counts 39.6% of the suburb's homes with four or more bedrooms, against 32.6% for Victoria, and 36.9% with three. In a family house the size question is not the floor area alone but which rooms are heated at the same time. Mitsubishi Electric's buying guide says sizing is not as simple as looking at the floor area, and it lists the heat load factors instead: the local climate, which sides face the sun, insulation, the size, type and orientation of windows and doors, and ceiling height. Rinnai's Brivis guidance adds that installers use a whole-of-home heat load calculation from the floor area, ceiling height, insulation and glazing, orientation and climate zone, and for 3187 that zone is Cold. Heaters and heat pumps are sold in steps: Rinnai's Classic Compact gas heaters come in 15.0, 19.5, 23.5 and 30.0 kW, Braemar's Dominator ducted heat pump is rated at 12.1 kW or 17.9 kW heating, and the Victorian Energy Upgrades ducted table steps at 10, 16 and 22.4 kW. Zoning changes the sum. energy.gov.au says ducted heating can be zoned to only the rooms where needed, and Solar Victoria advises zoning a home so only the areas in use are heated. As a general rule of how zoning works, a family that heats the living areas in the evening and the bedrooms overnight needs less output at any one moment than the whole floor area suggests. So the heat load result for the rooms in use, not the floor area, settles the kW, and the written quote names that figure.
Bayside's precinct plan records 26.3% of Brighton East residents as over 60 in 2021 and forecasts 36.5% by 2041. A household at home through the day heats for more hours than one that is out at work, so the running cost per hour and the ease of the controls count for more than peak output. Solar Victoria (page updated 28 August 2026) advises a winter setting of 18 to 20 °C and says each degree of difference can add around 10% to an electricity bill, while energy.gov.au puts each extra degree of heating at 5% to 10% more energy use. A reverse cycle split in the living room, or a zoned heat pump, held at one steady set point keeps the living area inside that band through the day. The controls can stay simple. Mitsubishi Electric's MSZ-AP operating manual allows up to 4 on or off settings a day on its weekly timer, 28 across a week, each with its own time and temperature, and its on/off timer takes priority over the weekly programme when plans change. The same manual describes automatic restart after a power failure, so the unit returns to its setting without being reprogrammed. The weekly timer can be set up at handover so the remote is needed only for small changes. Where an old gas room heater is still in use, swapping it for an efficient reverse cycle air conditioning unit is one route; the Victorian Energy Upgrades discount for that swap is set out in the cost section below.
Brighton East's housing runs from rebuilt homes with new systems to established houses with gas ducted heaters and older units inherited at purchase, and each needs a different kind of visit. The three parts below sort servicing and repair by the age of the plant: systems still under warranty, gas ducted heaters in established houses, and older splits and evaporative coolers that came with the house.
A system in a rebuilt or extended house is often still inside its manufacturer warranty. The Victorian Energy Upgrades program, for example, requires products it discounts to come with a minimum 5-year warranty for a home. Manufacturer warranty applies when the system is installed to the manufacturer's requirements, and some warranties set service conditions of their own, so check the warranty booklet for any required interval and keep every service record with it. A clean and a service are different visits. The Quote Yard describes a filter clean and visual check as a fifteen-minute visit, while a proper service covers coil cleaning, electrical testing, drainage checks, control verification and performance measurement across an hour or more. energy.gov.au advises a service inspection before peak use, for example late spring or autumn, which for a reverse cycle unit means before the heating season and before the cooling season. Mitsubishi Electric's MSZ-AP operating manual says that after several seasons of use, inspection and maintenance are needed in addition to normal cleaning. Between visits, the owner's share is the filter: Mitsubishi's filter guide says to clean it every two weeks during peak seasons and about monthly with light use. A deep aircon cleaning visit deals with the coil, barrel fan and drain tray inside the indoor unit, which the manual leaves to a technician.
In an established Brighton East house the gas ducted heater can be as old as the ductwork, and the Better Health Channel says all gas heaters, including central heating units, should be serviced at least every two years by a licensed gasfitter and tested for carbon monoxide spillage, with the flue inspected. The heater comes first. Brivis's Ducted Gas Heater Operation Manual sets out a Service Maintenance Schedule at two-year intervals that groups the checks into electrical items (wiring, fan motors, overheat switches and control boards), the heating assembly (burners, injectors, ignition, flame sensor, gas pressures and the CO level in ppm), major components (heat exchanger, cabinet and combustion air intakes) and controls (thermostats and zones). The flue is checked next. Brivis's StarPro service manual says soot marks on the flue terminal or flue pipe indicate poor combustion and possibly a blocked heat exchanger. Then the ducts, which in an older roof space have aged with the house: The Quote Yard says flexible ducting degrades over decades, insulation deteriorates, joints separate and rodents occasionally damage runs in roof spaces. Duct cleaning is a separate job from the heater service. The Building and Plumbing Commission says only plumbers registered or licensed for Type A appliance servicing may service these heaters. For the 19.5% of Brighton East homes the ABS records as rented, Consumer Affairs Victoria requires a gas safety check every two years by a licensed or registered gasfitter. The ducted heating service and repairs page covers error codes and heater repairs.
An older unit inherited with a house usually arrives with no service history, so fault finding starts at the outdoor unit's data plate, which The Quote Yard says carries the system's age and refrigerant type. Its rule of thumb for an old split: where a repair costs more than roughly half the price of a new system and the unit is past about ten years old, replacement is usually the better decision, and below either threshold repair is generally sensible. Fading cooling points to the refrigerant, but a top-up is not the fix. The Quote Yard explains that a sealed system does not consume refrigerant, so a low charge means a leak exists, and the recharge should be weighed in to the plate figure plus the pipe allowance once the leak is found and repaired. Roof evaporative coolers are the other system a buyer can inherit, and energy.gov.au notes the unit is generally on the roof, which suits a house: the ABS records 67.9% of Brighton East's dwellings as separate houses. Seeley International's Breezair owner's manual has a service record table for the service number, date, technician and company. An empty table means the residential schedule, every two years before summer, starts from the beginning, covering pads, pump, drain valve, float valve, motor, fan, roof penetrations and support frames. Seeley lists roofs pitched over 30°, access points more than 4 m above the ground and coolers close to a fall edge as sites where extra access charges may apply. Its troubleshooting table puts weak cooling down to dry pads, too few exhaust openings or humid weather. The evaporative cooler service and repairs page covers each fault.


The figures below are indicative ranges from Melbourne cost guides, installers and the Victorian Energy Upgrades program, read in November 2026. They are those sources' estimates, not this business's prices, and a written quote follows a visit. For a fault, The Quote Yard's Victorian repairs page gives a general attendance and diagnosis fee of $120 to $250, and its Melbourne table gives call-out fees from $120 to $280 across its five Melbourne regions. Its suburb list, read on 19 November 2026, does not name Brighton East, and the Bayside group it does list has no fee row of its own, so the call-out is confirmed at the quote.
Climate Control Solutions, a Melbourne installer whose figures were last reviewed in July 2026, gives indicative installed prices by size: $1,900 to $2,500 for 2.5 kW, $2,300 to $2,900 for 3.5 kW, $2,700 to $3,500 for 5.0 kW and $3,300 to $4,300 for 7.1 kW. For a bungalow taking a split in the living room and then the main bedroom, that is the price of each room in turn. Where an old unit is being changed over, whatsthedamage's Melbourne table puts a like-for-like changeover with the old unit removed at $1,575 to $3,150, typically $2,200, and removal and disposal alone at $105 to $370. Where the owner supplies the unit, its install-only range is $735 to $1,575. For a post-war house weighing one multi-head against separate splits, Climate Control Solutions sets a two-head multi-head at around $4,000 to $5,200 installed against about $4,600 to $5,800 for two separate 3.5 kW splits, and whatsthedamage puts a four-head system at $7,350 to $12,600, typically $8,900. Where a split replaces a non-ducted gas room heater, the Victorian Energy Upgrades household table lists discounts of $630 to $1,610 for a 3 to 9 kW reverse cycle unit, and $210 where a non-ducted reverse cycle unit replaces another. Long pipe runs, a second-storey bracket and switchboard work are what move a job within these ranges.
Whatsthedamage's Melbourne table splits ducted reverse cycle quotes along the same line this page draws between an original house and a new build. A three-bedroom home, or a single-storey four-bedroom home with good roof access, sits in its standard band at $8,400 to $14,700, typically $11,550: that is where a single-storey bungalow or post-war house with a clear roof space lands. A larger four-bedroom home, a two-storey house, or room-by-room zoning moves into its premium band at $12,600 to $23,100, typically $16,800, which is where a new double-storey build sits. QuickAir's Melbourne guide puts a large or multi-storey home at $10,000 to $25,000 and up. Whatsthedamage groups two-storey houses with other larger jobs rather than pricing a second floor on its own, so the upper floor's share is priced on the quote after the roof spaces are inspected. For gas ducted heating, homeupkeep's Melbourne table gives $4,800 to $6,400 for a 4-star 20 kW heater and $5,800 to $7,800 for a 5-star 23 kW model, and whatsthedamage puts whole-house ductwork replacement with new insulated flexible ducts at $2,000 to $6,300, which an older roof space may need. Where a ducted gas heater is replaced with ducted reverse cycle, the Victorian Energy Upgrades household table lists discounts of up to $2,520 for 10 kW, $4,200 for 16 kW and $5,530 for 22.4 kW. Replacing it with room systems instead earns up to $2,520 for four splits (one 8 kW and three 3 kW) or up to $2,940 for a multi-split on one 10 kW outdoor unit.
A house with a split or two, a gas ducted heater and an evaporative cooler pays for each system separately, so the figures add up line by line. For splits, QuickAir puts a multi-unit visit covering two to three heads at $280 to $480, and Climate Control Solutions gives a split service at $150 to $250 with each extra head on a multi-head adding $80 to $120. The Quote Yard's Victorian figures put a multi-head service at $180 to $400 and an annual maintenance plan at $200 to $450 a year. For a reverse cycle ducted system, Climate Control Solutions gives $250 to $450. For the gas ducted heater, homeupkeep's Melbourne table puts a standard service with no faults at $220 to $320, or $280 to $380 with a CO test. An evaporative cooler serviced before summer comes to $170 to $330 in The Quote Yard's Melbourne table, with the pads checked rather than replaced. For a fault, the call-out sits in the general range set out above, and The Quote Yard says it is usually credited against the repair if the repair goes ahead. Regas prices assume the leak is fixed first: The Quote Yard puts a leak repair and regas at $400 to $900 fitted, whatsthedamage's Melbourne table puts major repairs and regas at $315 to $1,250 per job, and hipages' national figure for replacing refrigerant alone is $160 to $400. Booking several systems in one visit can keep them on one record, though each is still priced as its own line on the quote.

Air Conditioning Installation
Air conditioning installation in Brighton VIC: split, multi-head or ducted systems sized by heat load, sited for bayside salt air and quoted in writing after an inspection.

Split System Installation
Split system installation in Brighton VIC: high-wall, floor-standing and multi-head splits installed to the manufacturer's manual and quoted in writing after an inspection.

Ducted Air Conditioning
Ducted air conditioning in Brighton VIC: reverse cycle, add-on cooling and new-build systems, zoned room by room and quoted in writing after a roof space inspection.

Reverse Cycle Air Conditioning
Reverse cycle air conditioning in Brighton VIC: heat pump heating and summer cooling from one system, fitted as splits, ducted or a hybrid unit, quoted in writing.

Evaporative Cooler Service and Repairs
Evaporative cooler service in Brighton VIC: pads, tray, bleed, pump and fan checked before summer, repairs for warm air and noisy fans, and a written record.

Air Conditioning Repair
Air conditioning repair in Brighton VIC: split, multi-head and ducted faults diagnosed, leaks found before any regas, salt-corroded coils checked, and a written quote first.

Emergency Air Conditioning Repair
Urgent air conditioning breakdowns in Brighton VIC, booked 6am to 10pm seven days: ceiling leaks, electrical faults and heatwave failures, with rates stated in the call.

Air Conditioning Service
Air conditioning service in Brighton VIC for split, multi-head and ducted systems: filters, coils, drains, outdoor units and electrical checks, with readings recorded.

Aircon Cleaning
Aircon cleaning in Brighton VIC: split system coils, barrel fans and drain trays cleaned inside the unit, with a wash bag fitted and every unit quoted in writing.

Ducted Heating
Ducted heating in Brighton VIC: new and replacement gas ducted heaters or electric ducted systems, with heater position, gas supply, flue and ducts checked before a written quote.

Ducted Heating Service and Repairs
Gas ducted heater servicing in Brighton VIC: two-yearly services to the maker's schedule, CO spillage testing, rental gas safety checks, duct cleaning and error code repairs.

Commercial Air Conditioning
Commercial air conditioning in Brighton VIC: splits, cassettes, rooftop packaged units and VRF for shops, offices and industrial units, with servicing and leak checks.
air conditioning In Brighton East
Whatsthedamage's Melbourne table (updated November 2026) gives a supplied and installed split at $1,250 to $2,625 for 2.5 kW and $1,475 to $2,950 for 3.5 kW, rising to $2,300 to $4,725 for 7 kW. Ducted reverse cycle runs from $8,400 to $14,700 in its standard band, for a three-bedroom home or a single-storey four-bedroom home with good roof access. QuickAir puts a typical three to four-bedroom ducted job at $8,000 to $14,000. These are indicative ranges, and the final figure follows an inspection and a written quote.
Neither is better in every house. energy.gov.au says ducted systems are not as efficient as wall units, because a larger fan is used and energy is lost through the ductwork, but a ducted system conditions the whole house from outlets in each room. Splits suit a single-storey bungalow done room by room, while ducted with zoning suits a larger or double-storey home with a usable roof space. In Brighton East, where 39.6% of homes have four or more bedrooms (ABS 2021), the roof space and the rooms used together usually decide it.
energy.gov.au says reverse cycle air conditioners turn one unit of electrical energy into 3 to 6 times as much heating, and that ducted reverse cycle is more cost-efficient than gas heating, which it calls expensive to operate. The Victorian Energy Upgrades program puts the bill saving at up to $1,140 a year when a ducted gas heater is replaced with an efficient reverse cycle system, with household discounts of up to $5,530 for a 22.4 kW system. energy.vic.gov.au says there is no requirement to replace existing gas space heating in a home, so the decision can wait until the old heater fails or needs a costly part, although rental homes follow their own rules.
For a house, the trigger the sources name is the Heritage Overlay. In both the Bayside and Glen Eira planning schemes, Clause 43.01-1 requires a permit for an air conditioner on a dwelling in the overlay if it is visible from a street, other than a lane, or a public park. Most of Brighton East is in Bayside, but a strip along Thomas Street is in Glen Eira, so check the rates notice or VicPlan for the council and the overlay, then confirm with that council. The 7.9% of homes that are flats (ABS 2021) also need owners corporation approval for anything on common property.
The Better Health Channel says all gas heaters, including central heating units, should be serviced at least every two years by a licensed gasfitter and tested for carbon monoxide spillage, and Brivis's service schedule runs at the same two-year interval. Rented homes need a gas safety check every two years under Consumer Affairs Victoria rules. Book sooner if the flame turns yellow or sooty, soot stains appear, or the walls or heater panels show heat damage, all signs Better Health lists.
energy.gov.au says reverse cycle air conditioners are 300% to 600% efficient, that wall units are more efficient than ducted systems, and that portable air conditioners carry a zero-star rating. For a non-ducted unit, compare the Zoned Energy Rating Label, which rates each model for hot, average and cold zones. Brighton East's postcode, 3187, is allocated to the Cold zone, so the cold-zone heating stars are the row to read. The government's Energy Rating Calculator compares models side by side.
GET A FREE QUOTE
BUSINESS
SERVICES
OPERATING HOURS
Sun: 6:00am - 10:00pm
Mon: 6:00am - 10:00pm
Tue: 6:00am - 10:00pm
Wed: 6:00am - 10:00pm
Thu: 6:00am - 10:00pm
Fri: 6:00am - 10:00pm
Sat: 6:00am - 10:00pm