Commercial Air Conditioning Brighton VIC, Sized to the Tenancy

Commercial air conditioning Brighton VIC 3186 covers the systems that cool and heat shops, cafes, offices and industrial units, and the upkeep that keeps them working. This page explains how wall and under-ceiling splits, ceiling cassettes, rooftop packaged units and VRF or VRV systems are built, what a commercial installation involves from site survey to handover logbook, what Melbourne cost guides put on each system and which premises each one suits. It also covers service cadence, refrigerant leak inspections set by the size of the charge and the AS/NZS 3666 records kept for ducted air-handling systems. Peak Air Conditioning Brighton gives a written quote after a site visit. Refrigerant work is done under an ARC refrigerant handling licence, and electrical connections are made by a licensed electrician. Enquiries are taken from 6am to 10pm, seven days a week.

GET A FREE QUOTE

Why Choose Peak Air Conditioning Brighton: Prices in Writing and Seven-Day Hours for Commercial Air Conditioning

Two things shape how a heating or cooling job in Brighton starts: knowing what each option costs before anything is booked, and finding a visit time that suits the household. Peak Air Conditioning Brighton is set up around both. Prices are put in writing after the site visit, option by option, and the phone line takes bookings for new systems, servicing, aircon cleaning and repairs from 6am to 10pm, seven days a week.

Peak Air Conditioning Brighton

Commercial Air Conditioning Brighton: Wall, Cassette, Packaged and VRF Systems

Commercial air conditioning comes in four broad builds, and this section describes each one by how it is put together: where the indoor unit sits, where the refrigerant runs and what the outdoor plant looks like. Mitsubishi Electric's light commercial page, read on 20 November 2026, says its range "includes wall-mounted, ceiling cassettes, ducted, and under ceiling models for shops, offices, and other light commercial applications". Daikin, ActronAir and Temperzone publish commercial ranges of their own. Which premises each build suits is a separate question, answered in the matching section further down the page.

Wall-Mounted and Under-Ceiling Splits: No Ceiling Void Needed

A split system has two halves: an indoor unit that delivers the conditioned air and an outdoor unit that holds the compressor, joined by refrigerant pipes and electrical wiring. In the wall-mounted and under-ceiling forms, the indoor unit is fixed to a wall or hung below the ceiling, so nothing has to go up into a ceiling cavity. Mitsubishi Electric describes its wall mounted units as the option "for smaller commercial areas or spaces with limited ceiling access". Its PKA-M-KAL series runs from 7.1 to 10 kW, has a quick clean grille and an optional drain pump, and connects with the PUZ-ZM Power Inverter outdoor units. Its ceiling suspended units provide air conditioning "for spaces without ceiling cavities": they "mount directly below the ceiling surface and deliver powerful, directional airflow". The PCA-M-KA series covers 5 to 13.5 kW, with a High/Low ceiling mode, automatic air-speed adjustment and a fresh outside-air intake. Outside, the SUZ-M outdoor units (2.5 to 7.1 kW) are described as compact units that work with a broad range of Mr Slim indoor units, and the PUZ-M units (5.0 to 14 kW) pair with ducted, under-ceiling and cassette indoor types. Because the only link between the two halves is the pipe and cable route through a wall or along the ceiling, planning that route is the main design job for these units. For a home rather than a business, the same two-part build is covered under split system installation.

Ceiling Cassettes Recessed Flush, With Four-Way or One-Way Airflow

A ceiling cassette is the indoor half of a split system built into the ceiling itself. Mitsubishi Electric's cassette page says the units "are designed to be recessed into the ceiling", and its commercial page says the PLA-M series "mounts flush within suspended ceilings", so only the grille panel shows below the ceiling line. The same cassette page says installation "generally requires mounting the indoor unit in the ceiling space and connecting it to the outdoor unit through refrigerant lines and electrical wiring", which is why a cassette needs a ceiling cavity that can take the body of the unit. Airflow leaves in one of two patterns. The four-way PLA-M-EA2 series spans 7.1 to 13.5 kW and lists a built-in drain pump, wide and horizontal airflow settings and an optional 3D i-See Sensor and auto-elevation panel. Mitsubishi's cassette page lists two smaller ranges: the SLZ-M series, also four-way, at 2.5 to 6.0 kW, and the MLZ-KP series, the one-way option, at 2.5 to 5.0 kW with a slimline body "only 185 mm high". A four-way cassette spreads air from each side of its panel, while a one-way unit sends it in a single direction, so the pattern is chosen to match where the unit sits in the room. Mitsubishi says its cassette range "comes with built-in drain pump", and the route that pump sends condensate along is one of the items a site survey confirms before the cassette position is fixed.

Rooftop Packaged Units: Self-Contained, With No Long Pipe Runs

A packaged unit holds the whole refrigeration circuit in one outdoor cabinet and sends conditioned air into the building through ducts. Temperzone's technical data for its OPA Econex series describes the type as "compact and self-contained in comparison to Split Systems which require long interconnecting piping", and says the units "are typically installed on a rooftop, where maintenance access is relatively easy during operating hours". The same document lists horizontal and downward supply and return air versions, so the duct connections can leave the side of the unit or drop straight down through the roof beneath it, and it gives a cooling capacity of 16 kW to 102 kW across the series. Filters sit behind a hinged door on the side of the unit, in a frame that holds 50 or 100 mm thick panel filters, and the compressors are isolated in a built-in, insulated compartment to minimise noise. Daikin says its rooftop packaged units (UAYQ-CY1A) "have been developed specifically to suit commercial applications", and that the "flat top and compact design" gives a neat appearance "when installed in the line of sight". ActronAir lists side by side and under/over duct connection options for its commercial packaged range and says it "can easily integrate with existing ductwork". With no indoor unit and no long refrigerant run inside the building, the building side of a packaged job is the duct connection, the roof position and the power supply, which the installation section covers.

VRF and VRV: Many Indoor Units on One Refrigerant Circuit

VRF, short for variable refrigerant flow, connects many indoor units to one outdoor system on a shared refrigerant circuit. Mitsubishi Electric sells its range as City Multi VRF and says the design "allows connection to a variety of indoor unit models and capacities"; Daikin sells its range under the VRV name. Mitsubishi's air-cooled heat pump outdoor units (PUHY) run from 22 to 150 kW, and its heat recovery units (PURY, 22 to 124 kW) use a 2-pipe design and a multiple port branch box to allow "simultaneous heating and cooling", so one room can cool while another heats. A water-cooled version (PQRY) "connects 15 to 50 indoor units per condensing unit" and is connected to the building's condenser water system in place of a large external condenser farm. Hybrid VRF runs refrigerant to a branch controller and water from there to the indoor units, which Mitsubishi says "do not require refrigerant leak detection monitoring and alarms in the occupied spaces". On the Daikin side, the VRV S HSE uses a single fan casing 870 mm high across capacities from 11.2 to 16.0 kW, with piping runs of up to 120 m, and the VRV R heat recovery range allows refrigerant piping lengths of up to 165 m and a maximum height difference of 110 m. Central control ties the indoor units together: Mitsubishi's AE-C400E controller offers annual and weekly schedules, energy monitoring and a single gateway for BMS integration, and can control and monitor up to 400 indoor units with an expansion module.

Peak Air Conditioning Brighton

Commercial Air Conditioning Installation: Site Survey, Plant Position, Power and Handover

A commercial installation runs in four stages: a survey of the building, a decision on where the outdoor plant goes, the power supply, and commissioning with paperwork at handover. Two trades are involved. Mitsubishi Electric's commercial page says "a licensed refrigeration technician must handle the air conditioning installation, while a licensed electrician must complete electrical connections", and ARC's licensing page says any person who handles refrigerant or works on refrigeration and air conditioning equipment must hold a refrigerant handling licence. The domestic install steps, from the wall hole to the pressure test, are not repeated here; this section stays with what changes on a shop, office or industrial job.

A Site Survey of Ceiling Voids, Roof Access and Existing Pipework

The survey records what the building already has before any system is chosen. Above the ceiling, it checks whether there is a cavity at all, how deep it is and whether the ceiling is suspended, since a cassette has to sit inside the void while a wall or under-ceiling unit does not. On the roof, it checks how plant would be reached and whether a crane would be needed to get it there. Existing pipework gets particular attention. whatsthedamage's Melbourne commercial guide (updated November 2026) treats the reuse of old pipework, ducts and mounting points as one of the first questions on any commercial job, and it suggests asking each quote "to say whether existing pipework passes a pressure test". Mitsubishi Electric's Mr Slim range has cleaning-free pipe re-use technology with a "wide strainer" that captures iron particles before they reach the outdoor unit, although Mitsubishi asks buyers to contact a local dealer for the details of where it applies. The refrigerant itself matters: Temperzone's R32 packaged data says "consideration must be given to the minimum floor area requirements of R32 refrigerant", so the size of each room served is recorded. That document gives no area figure for the general case, and none is assumed here. The same cost guide says a commercial quote should state the heating and cooling capacity per zone and how the system handles high or uninsulated ceilings, so the survey also notes ceiling height, roof insulation and the hours each area of the premises is in use.

Outdoor Plant on the Roof, in a Rear Lane or on a Side Wall

Where the outdoor plant can go is often decided by the frontage. whatsthedamage's guide says "narrow retail frontages often leave the outdoor unit with only a rear lane, a roof or a side wall". Each spot brings its own conditions. A roof suits packaged units, which Temperzone says are typically installed there, and it keeps condensers out of a crowded lane, but it brings the access questions the cost section deals with. A rear lane keeps plant off the shopfront but can mean a long pipe run back to the indoor units; Mitsubishi Electric's PUZ-ZM outdoor units (7.0 to 14 kW) offer "extended pipe run capabilities" for "complex commercial layouts where longer distances between indoor and outdoor units are required". A side wall is usually the tightest of the three, with neighbours on one or both sides. Whatever the spot, the unit needs clear air: Temperzone's data says "correct unit clearances, along with no air recirculation, must be maintained", so a condenser boxed into a corner where it draws back its own discharge air is the position to avoid. Brighton sits on the bay, and The Quote Yard says bayside outdoor units "from Williamstown around through Brighton, Mordialloc and Frankston" corrode at the coil and cabinet, with periodic fresh-water rinsing of the outdoor coil slowing it; that is an aggregator's view, given without any distance from the water. A condenser in view of the street is also a question for Bayside City Council, since the sources read for this page do not say whether a heritage or planning rule applies to any given frontage.

Three-Phase Supply and Switchboard Work for Larger Units

Larger commercial plant can need a three-phase supply. Temperzone's OPA packaged data gives the electrical supply required as "3 phase 400 V a.c. 50 Hz with neutral and earth". At the smaller end, Mitsubishi Electric's PUZ-ZM outdoor units come "in both single and three-phase configurations (7.0kW single phase only)", and its 16 kW PEA-M160HAA ducted unit lists single phase or three phase power options. So the supply a unit needs depends on the model and its capacity, and the data sheet for the proposed unit is where the answer sits. The survey therefore records what the premises' switchboard has: whether a three-phase supply is present, and whether the board can take the new circuit. None of the sources read for this page says whether a particular Brighton shop or office has three-phase power, so that is checked on site rather than assumed. Any change at the board is electrical work, and Mitsubishi says a licensed electrician must complete the electrical connections. whatsthedamage lists "electrical connection and any switchboard work" as a line a compliant commercial quote should show, and a quote that prices switchboard work as its own line makes the cost of an upgrade visible before the job starts, rather than leaving it to be found on installation day.

Commissioning Data, Test Certificates and a Logbook at Handover

Commissioning is where the system is tested and handed over, and the paperwork is what the business keeps. The ARC/AIRAH Refrigerant Handling Code of Practice 2025 (Part 2) sets the leak tightness test pressure to be held for a full day for initial system commissioning tests, against 1 hour when a repair or component replacement is being tested. It then lists what the installer must provide: "Operating and maintenance instructions, including logbook", "Commissioning data" and "Test certificates", and it adds that "training of the system operator is recommended". For systems holding more than 3 kg of refrigerant, the code expects a logbook that records maintenance and repair works, the quantities of refrigerant charged or transferred, component changes, periodic test results and periods of non-use. The code also says the customer should be reminded when routine maintenance is due for a period of at least two years after installation, and that a service checklist, such as AIRAH's DA19, is given to the customer after each service. For a tenancy, that file is worth keeping with the lease papers: a later contractor, an incoming tenant or the building owner can see what was installed, how it was tested and what refrigerant it holds. Controls set-up belongs at handover too, because zone timers and central schedules only save running hours if someone on the premises knows how they were set and how to change them.

Peak Air Conditioning Brighton

Why Choose Peak Air Conditioning Brighton for Commercial Air Conditioning

Two things a business can check before work starts are set out below: what the written quote lists, and who is responsible for getting roof plant approved. Peak Air Conditioning Brighton provides that written quote after a site visit, with refrigerant work done under an ARC refrigerant handling licence and electrical connections made by a licensed electrician. The phone line is open from 6 in the morning until 10 at night on every day of the week, so an enquiry can be made before opening time or after close.

A Written Quote Listing Controls, Zone Timers and Old Plant Removal

whatsthedamage's guide sets out what a compliant commercial quote includes, and three of its lines are easy to leave out. The first is controls: "Controller and zone timers included, with set-up at handover". The same guide suggests fitting zone timers "so studios, meeting rooms and print rooms only run in the hours they are actually used", which matters where parts of a premises keep different hours, such as a back office used before the shop floor opens. The second is the old plant: "Removal of old plant and recovery of its refrigerant". That line has a legal basis behind it. The ARC/AIRAH code says "all scheduled refrigerant must be recovered from all parts of the system at the time of decommissioning", that the equipment must then be labelled as decommissioned and emptied of refrigerant with a dated and signed label, and that scheduled refrigerant "must never be deliberately vented". The third is the electrical scope: "Electrical connection and any switchboard work". The checklist also asks for the maintenance visits per year and the tasks done at each, and for the contractor's "refrigerant handling licence number and insurance details". Ask for both in writing from any contractor quoting, this business included, and compare quotes line by line rather than on the bottom figure, since a cheaper quote that leaves out removal or controls set-up is not quoting the same job.

Who Arranges Landlord Sign-Off for Roof Plant, Stated in Writing

On a leased premises, roof plant can involve people other than the tenant: the landlord, an owners corporation, or both. whatsthedamage's guide says a commercial quote should state "whether landlord or owners corporation sign-off for roof plant is arranged by the client or the installer". Writing that down settles who chases the approval and who waits on it, and the same guide warns that "older office stock and strata approval processes add lead time". In a strata building, it suggests coordinating crane lifts and roof access with the owners corporation and other lots, so that one booking covers several jobs. A second owner obligation can sit behind roof plant. The Building and Plumbing Commission's essential safety measures guide, read on 20 November 2026, says that work to alter an existing building "may affect the essential safety measures", and to check with a municipal building surveyor or private building surveyor to see what needs to be done. Essential safety measures apply to every building other than a house or outbuilding, including Class 5 offices and Class 6 shops, cafes and restaurants, so a landlord asked about new roof plant may well raise that question. None of this is a lease term: what a particular lease allows on the roof is for the tenant to confirm with the landlord before a quote is accepted, and the written quote then records which party is getting the sign-off.

Peak Air Conditioning Brighton

What Commercial Air Conditioning Costs in Brighton VIC

The figures below come from whatsthedamage's Melbourne commercial cost guide, updated November 2026, which says all of its figures include GST. They are an aggregator's estimates for the Melbourne market, not survey data and not the price of any one contractor, and they are given here as a guide to scale. A written quote follows the site visit, because the reuse of existing pipework, the plant position and the access decide where in each range a job lands.

Price Ranges for Splits, Cassettes, Packaged Units and VRF

whatsthedamage's table prices each system on its own basis. A commercial split, supplied and installed, runs from $2,600 to $7,800 per job, and a ceiling cassette from $4,200 to $9,900 per job. A small office system under about 200 m², new or replacing an old one like for like, runs from $7,800 to $15,600, with $11,450 as the typical figure. A small ducted or packaged system for a larger tenancy runs from $12,500 to $31,200 per job. VRF and VRV are priced per indoor unit, at $3,600 to $7,800 for each one, and the guide says the VRF quote "scales with the rooms or suites served". Those bases are not like for like: a cassette figure covers one job, while a VRF figure has to be multiplied by the number of indoor units before it can be set beside it. Labour is a separate line, at $100 to $170 an hour for commercial work in the same guide. hipages' national article, which quotes rates before GST, sets commercial air conditioning labour at "$80 - $140 per hour + GST" against $80 to $110 for domestic work, so commercial labour is priced above domestic in both sources. A refrigerant leak detection and regas on commercial plant runs from $420 to $1,200 per job in the Melbourne guide; how leaks are traced and fixed is covered under air conditioning repair. The guide works out no total for any Brighton premises, and none is worked out here.

What Drives the Quote: Reused Pipework, Pipe Runs and Ceiling Type

Within each range, the building sets the figure. whatsthedamage's guide says that whether old pipework, ducts and mounting points can be reused, and how hard the plant is to reach, "decides most of the spread". Reuse has a manufacturer angle too: Mitsubishi Electric says its cleaning-free pipe re-use technology allows existing refrigerant piping to be reused, "potentially reducing installation costs", and the guide's advice to have each quote say whether that pipework passes a pressure test is what turns the saving from a hope into a line item. Pipe runs are the second driver. The guide says "long pipe runs back to a laneway add to the price", so the condenser position is priced as part of the pipe route rather than on its own. Ceiling type is the third. A suspended ceiling lets a cassette or a duct go in from below; a high or exposed ceiling has nowhere to hide pipe and duct, and the guide notes that hiding pipes and ducts while keeping a building's character "takes extra labour and design time". For a warehouse conversion, it says the quote should state whether ductwork is exposed or hidden and how it is finished. For VRF, the guide adds that "controllers, pipe routing and the plant location make up the rest of the price" beyond the per-unit figure. None of these drivers carries a dollar figure of its own in the guide, so the written quote is where each one is priced.

What Drives Access Costs: Crane Lifts, Roof Plant and After-Hours Work

Access is priced apart from the system. whatsthedamage's guide says "small cranes, after-hours deliveries and footpath traffic control can add cost and time to installs", and its quote checklist includes laneway access, small-crane hire and any footpath or traffic control. For towers and larger buildings it adds booked loading docks, lift access, building management approval and work outside business hours. Roof plant brings several of these together: a packaged unit or a bank of condensers has to reach the roof, and where a building has no internal route for it, a crane lift and traffic control on the footpath become part of the job. The guide, re-read on 20 November 2026, gives no separate dollar figure for crane hire, traffic control, after-hours work or building approvals, so none is given here. The after-hours multipliers that repair cost guides publish for household call-outs do not transfer to commercial installs either. After-hours work in this section means work outside the premises' trading hours, so a shop or office can keep trading; it is an option to raise when the quote is prepared, not a promise, and Peak's phone line keeps its usual 6am to 10pm hours throughout. The written quote should say which of these items apply to the site, who books the crane and the building's loading dock or lift, and what each one adds.

Quarterly Maintenance Contracts Priced per Unit per Year

whatsthedamage's guide prices commercial maintenance on a different basis from a household service. It puts a maintenance contract with quarterly visits at $310 to $850 per unit per year, covering "filters, coil cleaning, condensate treatment, electrical checks and, on ducted air-handling systems, the hygiene items AS/NZS 3666 expects", with records kept for building compliance. The per-unit basis means the contract total follows the number of units on site, so a shop with one cassette and an office floor with a dozen VRF indoor units sit far apart even at the same rate. The guide lists three ways commercial work is priced: a fixed price per job, a price per unit per year, and hourly labour at $100 to $170 an hour. A contract moves routine servicing onto the per-unit basis, so the visits are budgeted a year at a time instead of arriving as separate invoices. Where a site has a cooling tower, the guide says monthly tower servicing is a separate fixed line with no price row on its page, and to ask for it per visit and in writing. Before signing any maintenance contract, compare the visits per year, the tasks done at each visit and the records left behind, not the per-unit figure alone, because two contracts at the same rate can cover very different work.

Peak Air Conditioning Brighton

Splits, Cassettes, Packaged Units or VRF: Matching the System to the Premises

With the four builds described above, this section turns to which one suits which premises. Mitsubishi Electric's own answer is that "the choice depends on the space configuration and capacity requirements", and whatsthedamage's guide sorts Melbourne premises the same way: by floor level, by ceiling and by the number of tenants. No source read for this page gives a rule of thumb for the point at which VRF beats a set of splits, so the comparison below is about fit, and the site survey settles the rest.

Ground-Floor Shops and Cafes: Cassettes or Split Systems

whatsthedamage's guide says "ground-floor retail and hospitality" premises "tend toward cassettes or split systems", and that a commercial split or a ceiling cassette "covers a single room or shopfront". The ceiling is the first thing that separates the two. Where a shop has a suspended ceiling, Mitsubishi Electric says cassettes "suit open-plan offices and retail environments requiring four-way airflow distribution", and its FAQ calls its PLA-M EA cassettes "ideal for drop ceilings". Where there is no ceiling cavity, or the ceiling is exposed or part of the building's character, Mitsubishi points to its ceiling suspended units for "restaurants, shops and commercial premises with exposed ceilings or heritage features where traditional ducted systems aren't viable". A cafe kitchen is a case of its own: Mitsubishi offers the 7.1 kW PCA-M71HA2 in a stainless steel casing "built to handle the challenges of tough commercial kitchens", with a replaceable oil mist filter. Wall mounted units suit the smaller rooms behind a shop, which Mitsubishi describes as "offices, meeting rooms and retail spaces". On the outside, it calls its SUZ-M outdoor units "ideal for residential and light commercial applications, particularly shop front installations". Its FAQ adds that wall mounted and ceiling suspended systems suit "heritage sites, hospitality venues or tenanted properties where building modifications are limited", which is the position of a tenant who cannot alter the structure of a leased shop.

High Ceilings and Open Floor Areas: Ducted or Packaged Plant

Tall, open spaces are where commercial and industrial air conditioning moves from room units to central plant. whatsthedamage's guide says high ceilings and exposed roofs make converted buildings "harder to condition, so ducted or packaged plant is common". The manufacturers name the same kinds of buyer: Temperzone lists applications for its OPA packaged series that include "retail warehouses, supermarkets, shopping malls", and ActronAir describes its commercial packaged range as suited to "retail stores, offices, restaurants, cafes and warehouses". For an open-plan floor that does have a ceiling space, Mitsubishi Electric suggests its PEA-M HAA ducted units, which "offer discreet installation with consistent airflow". Sizing is the hard part in a tall space. The guide says a quote for such a building should state the heating and cooling capacity chosen "for the full ceiling height", and it warns that uninsulated roofs add heat in summer and lose warmth in winter, so it is worth asking whether roof insulation was allowed for in the sizing. Exposed ductwork is a design decision in its own right here, so the quote should also say whether the duct is exposed or hidden and how it is finished. Industrial air conditioning for a warehouse or workshop floor is chosen the same way, from the ceiling height, the roof and the hours the floor is in use, with packaged plant on the roof the common answer. For a home, the closest equivalent is whole-house ducted air conditioning.

Upper Floors With Several Tenants: VRF With a Zone per Tenancy

A floor shared by several tenants raises a different question: each tenancy wants its own temperature, and a building owner may want to know what each one uses. whatsthedamage's guide says "upper floors with several tenants often go to VRF", which "lets each tenancy control its own zone", and that the VRF quote scales with the rooms or suites served. The manufacturers describe the same use. Mitsubishi Electric says City Multi VRF "allows for a vast range of applications from commercial offices to apartment buildings" and is "ideal for commercial spaces that require varied temperature settings in different areas", and its AE-C400E central controller offers energy monitoring and tenant billing. Daikin says its VRV R range helps "reclaim valuable leasing space for owners and occupants of existing buildings" by reducing the footprint of mechanical equipment, and it pitches the VRV S HSE at buildings "from apartments and accommodations to cafes and restaurants". Heat recovery adds a reason to choose VRF on a shared floor, since one suite in the afternoon sun can cool while another heats. Against that, a VRF system is one shared system, so it follows that it is a decision for whoever controls the whole floor, the owner or the owners corporation, more than for one tenant fitting out one suite, who may be served by a split. No source gives a tenancy count or floor area at which VRF becomes the better choice, so the two are compared at the quote, with the per-unit VRF price set against the cost of separate splits for the same rooms.

Peak Air Conditioning Brighton

Commercial Air Conditioning Service: Maintenance Cadence, Leak Checks and Hygiene

Commercial servicing runs to a different rhythm from a home system, and parts of it are set by codes and regulations rather than by habit. This section covers the routine service interval, refrigerant leak inspections and the AS/NZS 3666 hygiene standard for ducted air-handling systems. The ARC/AIRAH code says a system's instruction manual must include "the maintenance instructions for the entire system with a time schedule for preventive maintenance with respect to leakage", so the manual for the installed plant comes first wherever it sets a schedule. Intervals for a household split or ducted system are set out under air conditioning service.

Filters, Coils and Condensate Serviced Quarterly to Six-Monthly by Duty

whatsthedamage's compliance and service frequencies table gives "quarterly to six-monthly by duty" for filters, coils, condensate and the general service, and labels the basis as "recommended practice (manufacturer/industry cadence)". Duty means how hard a unit works, so on that reading a cassette over a cafe counter that runs every trading day sits at the quarterly end, while a meeting-room unit used a few hours a week can sit nearer six-monthly. It is an aggregator's recommended practice, not a regulation and not a manufacturer requirement, and the same table keeps the other items apart: refrigerant leak checks "at each service; on any performance drop", on a basis it labels as recommended practice for ARCtick-licensed work, and a full system condition review once a year. What the filter work involves depends on the unit. Temperzone's packaged units take 50 or 100 mm thick panel filters reached through a hinged door on the side of the cabinet, and Mitsubishi's PCA-M71HA2 kitchen unit has a replaceable oil mist filter. Coil cleaning covers the indoor and outdoor heat exchangers, and condensate work keeps the drain pan, the drain line and, on a cassette, the built-in drain pump clear. The cost guide's contract wording names the same three items, filters, coil cleaning and condensate treatment, plus electrical checks, so a service record that does not mention them has not shown the work it was paid for.

Refrigerant Leak Inspections Set by the Size of the Charge

Leak inspection on commercial plant is tied to how much refrigerant the system holds. The ARC/AIRAH Refrigerant Handling Code of Practice 2025, Part 2, says that where the system's own manual gives no leak inspection schedule, the recommended in-service frequency from AS/NZS 5149.4 applies. For systems holding 3 kg or less, inspection is "after repair or when leakage is suspected". From over 3 kg up to 30 kg, it is "every 12 months". From over 30 kg up to 300 kg, it is "every 6 months", and above 300 kg, "every 3 months". The code works from the charge on the unit's identification plate, so the band is read off the plant rather than guessed. The sources read for this page give no charge figure for any model, so no model or system type is placed in a band here; the plate on the installed plant settles it. The code links the logbook to the same 3 kg line: above it, a logbook records maintenance and repair works, the refrigerant charged or transferred, component changes, periodic test results and periods of non-use. That logbook is what a later contractor, or an owner checking that a contract has been honoured, reads first. Finding and repairing a leak once one is suspected is repair work, with its Melbourne price range in the cost section above; the inspection schedule here is only about when someone looks.

AS/NZS 3666 Upkeep and Records for Ducted Air-Handling Systems

AS/NZS 3666 is the hygiene standard in this section's heading. Its Part 2, AS/NZS 3666.2:2011, listed on the Standards Australia store as "Pending Revision", is titled "Air-handling and water systems of buildings - Microbial control, Part 2: Operation and maintenance". Its scope sets minimum requirements for the operation and maintenance of air-handling and water systems "for the purposes of microbial control", and says "it does not include requirements for refrigerated room airconditioners and non-ducted split systems". The store page's contents list covers access for maintenance; maintenance of air-handling systems, including outdoor air intakes and exhausts, air filters, humidifiers, evaporative air-cooling equipment, and ducts and components; and operating and maintenance manuals and maintenance records. No clause text is quoted beyond that list. So the standard bears on ducted and packaged systems, not a wall split. The Victorian owner obligations around it are on official pages read on 20 November 2026. The Building and Plumbing Commission's essential safety measures guide lists, among items in Schedule 8 of the Building Regulations 2018, "air handling systems (used for smoke hazard management)" and "mechanical ventilation (incorporate a cooling tower or hot or warm water system)". It says the building owner must maintain those measures, must prepare an annual essential safety measures report, and must keep records of maintenance checks available for inspection on a full day's notice. Where a site has a cooling tower system, the Department of Health's cooling tower page (updated 16 April 2025) says the land owner must develop a risk management plan to control Legionella growth, must register the system with the department, and must have it audited annually by an independent auditor. Those duties sit with the owner; the records from each service are what the owner, or an authorised agent, draws on to meet them.

Peak Air Conditioning Brighton

Brighton Commercial Premises: Church Street, Bay Street and Moorabbin Industrial Units

Three commercial settings near Brighton are covered here: the Church Street Centre in Middle Brighton, the Bay Street centre in North Brighton, and the industrial area on Moorabbin's eastern side. Church Street and Bay Street fall under Bayside City Council, and Moorabbin is in the City of Kingston. The sources read for this page do not count how many shops, offices or strata buildings each place holds, so each part below describes the place from council plans and Wikipedia, then the constraint it brings to an installation.

Church Street Centre, Middle Brighton: Retail and Dining Tenancies

The Church Street Centre in Middle Brighton has its own structure plan, prepared for Bayside City Council by Planisphere in November 2006. Its vision is that "the Church Street Centre will be a Centre of high quality retail and dining, with a vibrant street life and community feel", and the plan's map marks a retail area, an offices and mixed use area and the triangle formed by Church Street, St Andrews Street and New Street. Bayside's structure plan describes the centre as the council saw it in 2006; its current status has not been confirmed for this page, so it is not treated as a current rule. Wikipedia adds part of the street's building history: in 1979 an application was made to replace the Dendy Cinema on Church Street with a two-screen cinema complex "along with shops and offices", and the new Dendy Centre opened on 30 April 1985. For an air conditioning job, a strip of this kind brings the constraints whatsthedamage's guide names for retail strips: "tight frontages, rear lane access and neighbour noise concerns", where condenser placement and quiet models can affect the price. A tenancy in a row of shops may not control the roof or the lane, so the plant position needs the landlord's agreement, and an office above a shop or a dining room beside a neighbour puts the condenser close to other people. Whether a heritage overlay or planning permit applies to a condenser on a particular Church Street frontage has not been read for this page, so check with Bayside City Council before the position is settled.

Bay Street, North Brighton: Shopfronts With Offices and Homes Above

Bay Street in North Brighton is the subject of Bayside City Council's Bay Street Centre Structure Plan Review of August 2016. The review says "the Commercial 1 Zone, General Residential Zone and Mixed Use Zone are the primary zones affecting the centre", recommends retaining the Commercial 1 Zone for its commercial areas, and sees opportunities in "supporting residential development and shop-top office and residential uses". Wikipedia places the Palace Brighton cinema on Bay Street, North Brighton. Shop-top uses change the air conditioning job. An outdoor unit on the roof of a shop with a flat or an office above it sits close to windows and balconies that belong to someone else, so its position, its noise and its running hours matter more than they would behind a stand-alone shop. The Building and Plumbing Commission's essential safety measures guide treats this mix as a building class of its own: Class 4 is "a dwelling in another class of building", listed beside Class 5 for offices and Class 6 for shops, and essential safety measures apply to all three. A residential zone beside a commercial one also matters for noise, because EPA Victoria sets commercial noise limits partly by land use zoning, as the noise part below explains. The 2016 review is a council planning document, not an air conditioning rule; it sets no requirement for plant, and none is claimed here.

Industrial Units on Moorabbin's Eastern Side

Moorabbin sits in the City of Kingston rather than Bayside, and Wikipedia says "most of the eastern side of Moorabbin has been an industrial area since the first development in the mid-1960s". That is the setting for industrial air conditioning near Brighton: offices, showrooms and work floors inside industrial buildings rather than shopfronts. The sources read for this page do not describe the buildings themselves, their ceiling heights, roofs, insulation or power supply, so each of those is recorded at the site survey rather than assumed. Where an industrial unit has a tall, open floor, the high-ceiling comparison above applies: ducted or packaged plant is the common answer, with the capacity chosen for the full ceiling height. Where it has a small front office, a wall or under-ceiling split may serve that room on its own. Packaged plant is also where a three-phase supply comes in, since Temperzone's OPA units need 3 phase 400 V, so the switchboard check carries more weight on an industrial job than on a small shop. The building class matters as well: the Building and Plumbing Commission lists Class 7 for buildings used for storage or display of goods and Class 8 for production or assembly of goods, and essential safety measures apply to both. EPA Victoria's noise page says "higher noise levels are generally allowed close to industrial areas", but in Melbourne the limits are based on the zoning around the noise-sensitive area, so an industrial unit that backs onto houses is assessed by the zoning around those houses.

Plant Near Homes: Commercial Noise Limits Set by Zoning and Time of Day

Commercial plant near homes falls under different rules from a household air conditioner. EPA Victoria's "Commercial, industrial and trade noise" page, updated 17 March 2026 and read in full on 20 November 2026, says noise from commercial, industrial and trade premises "must not be unreasonable or exceed noise limits", and that noise limits "apply to commercial, industrial and trade premises of all sizes", so a single cafe condenser is covered as much as a factory. The limits for a business depend on "land use zoning in a planning scheme", "the location of noise-sensitive areas", "existing background noise", "what time of day the noise occurs" and "any noise from other businesses nearby". In major urban areas, the page says the limits are based on the zoning around the noise-sensitive area and the background sound, with each zone given a designated type: type 1 for residential, rural and open spaces, type 2 for commercial, business and light industry, and type 3 for general industry and major roads. Lower levels generally apply in residential areas. The page publishes no numeric limit, so none is given here. Two lines bear directly on an installation: "businesses are responsible for noise made by contractors or tradespeople they hire", and EPA investigates noise complaints that include "facilities with large air-conditioning and refrigeration equipment". EPA co-regulates this noise with local government, so Bayside City Council is a second point of contact. For any shop with homes above or behind it, that puts the plant position, a quieter model where neighbours are close, and the hours the plant runs into the quote discussion from the start.

TESTIMONIALS

What Our Commercial Air Conditioning Customers Say About Us

The Process

3 Step Process For Your Commercial Air Conditioning Needs

Site Visit

After the first call, a technician visits to look at the rooms to be heated or cooled, the walls, roof space or subfloor where equipment could go, the switchboard and any gas supply. The Victorian Energy Upgrades buyer's guide advises having installers check what size suits the home, because a system that is too large can use more energy and cost more to run.

Written Quote

The written quote names the system and its heating and cooling capacity, the unit positions, the pipe or duct route, any electrical or gas work, any approvals needed and the price of each option. Where a VEU discount applies, an accredited provider applies it before work starts, because the energy.vic.gov.au page says retrospective discounts are typically not possible.

Installation Day

The units are fitted, and the refrigerant pipework is pressure tested and evacuated before the system is charged. A licensed electrician does the wiring and issues a Certificate of Electrical Safety, and any gas work is done by a licensed gasfitter. Handover covers the modes, filter cleaning and the documents to keep.

FREQUENTLY ASKED QUESTIONS

Commercial Air Conditioning In

Everything you need to know about our Commercial Air Conditioning In

How much does a commercial AC cost?

whatsthedamage's Melbourne commercial guide, updated November 2026 with GST included, puts a commercial split at $2,600 to $7,800 installed and a ceiling cassette at $4,200 to $9,900. A small ducted or packaged system runs from $12,500 to $31,200, and VRF or VRV is priced per indoor unit, at $3,600 to $7,800 each. These are an aggregator's estimates, not any one contractor's price. Reused pipework, pipe runs, the ceiling and access move a job within each range, so the price for a given premises comes in a written quote after a site visit.

Which type of AC is best for commercial use?

It depends first on the floor area and the ceiling. A single room or shopfront with a suspended ceiling suits a cassette, and one with no ceiling cavity suits a wall or under-ceiling split. A large open floor with a high ceiling commonly goes to ducted or packaged plant, according to whatsthedamage's guide. Where a floor holds several tenants who each want their own control, the same guide says VRF is often chosen, because each tenancy can run its own zone. No source sets a size at which one type takes over from another, so the choice is made at the site survey.

What is commercial air conditioning?

Mitsubishi Electric's answer is that commercial air conditioners "are designed to cater to larger spaces and are available in a wide range of larger capacities than residential models", and that commercial systems "have sophisticated monitoring and control capabilities". In practice the term covers wall and under-ceiling splits, ceiling cassettes, rooftop packaged units and VRF systems serving shops, offices and industrial buildings. Commercial plant also carries duties a household system does not, such as leak inspections set by the refrigerant charge and, for buildings other than a house, the essential safety measures the Building and Plumbing Commission describes.

How often should commercial air conditioning be serviced?

whatsthedamage's guide gives quarterly to six-monthly for filters, coils and condensate, depending on how hard the unit works, with leak checks at each service and a full condition review every year; it labels that as recommended practice, not a regulation. Leak inspections follow the ARC/AIRAH code, which applies the AS/NZS 5149.4 frequency by charge size where the manual gives none, from every 12 months for over 3 kg up to 30 kg to every 3 months above 300 kg. The manual for the installed plant comes first wherever it sets a schedule.

Does commercial air conditioning need a three-phase power supply?

Larger units can: Temperzone's OPA packaged units need "3 phase 400 V a.c. 50 Hz with neutral and earth". Smaller light commercial units often run on single phase: Mitsubishi Electric's PUZ-ZM outdoor units come in single and three-phase versions, with the 7.0 kW model single phase only. The data sheet for the proposed unit sets the supply, and the site survey checks what the switchboard has. Any switchboard work is done by a licensed electrician and should appear as its own line in the quote.

Can commercial air conditioning be installed outside trading hours?

It can be, where that is agreed when the quote is prepared. whatsthedamage's guide says small cranes, after-hours deliveries and footpath traffic control can add cost and time, and that larger buildings bring booked loading docks, lift access and work outside business hours. The guide gives no dollar figure for after-hours work, so none is quoted here; ask for it as a separate line. Phone enquiries are answered from 6am to 10pm, and any work outside trading hours is set out in the written quote rather than promised in advance.

Request A Free Commercial Air Conditioning Quote

GET A FREE QUOTE